1) high conductive silicone rubber
高导电硅橡胶
1.
The kind,application field and its status and progress of high conductive silicone rubber and wave absorption silicone rubber at home and abroad were presented,and the proposals of research and development of the functional materials in home were gived.
回顾了功能性硅橡胶应用于电磁屏蔽领域的发展背景,详细介绍了高导电硅橡胶和吸波硅橡胶的种类、应用场合及国内外发展现状及研究进展,最后对国内这两种功能材料的研究和开发提出了建议。
2) conductive silicone rubber
导电硅橡胶
1.
Influence of natural aging on linear characteristic of conductive silicone rubber;
自然老化对导电硅橡胶线性特性的影响
2.
Influence of natural aging on property of resistance of conductive silicone rubber;
自然老化对导电硅橡胶电阻特性的影响
3.
The effects of the dosage of silver-plated glass Beads,the varieties and dosage of silane coupler on the conductive and mechanical properties of conductive silicone rubber filled with silver-plated glass beads were studied.
结果表明,采用乙烯基三过氧叔丁基硅烷(VTPS)对镀银玻璃微珠表面进行预处理,可以改善胶料的混炼工艺,也可以提高硫化胶的力学性能、导电性能和导电稳定性能;添加180份VTPS处理的镀银玻璃微珠,导电硅橡胶体积电阻率小于0。
3) conductive silicon rubber
导电硅橡胶
1.
Through the measurement of electrical resistivity of conductive silicon rubber filled with carbon black, the critical value of electrical resistivity was obtained.
通过对炭黑填充复合型导电硅橡胶的电阻率的测量 ,得到了复合型导电硅橡胶的电阻率的临界值 ,根据导电机制模型推出计算电阻率 ρ的理论表达式 ,并对实验结果进行了拟合。
4) hexa-functional ethylidyne siloxane
RTV导电硅橡胶
1.
A new hexa-functional ethylidyne siloxane was synthesized through hydrosilicone addition reaction, and the siloxane was characterized by FT-IR spectra and GC-MS spectra.
以此六官能度乙撑硅氧烷作为交联剂,与107胶、填料、乙炔炭黑,催化剂配混,制备双组分脱醇型RTV导电硅橡胶。
6) thermal-conductive silicone rubber
导热硅橡胶
1.
Properties and application of thermal-conductive silicone rubber;
导热硅橡胶的性能与应用
2.
Thermal conductive filler (graphite, carbon black and alumina) and crosslingking agent were dispersed in poly(vinylmethyl siloxane) using a two-roll mill, and then cured in a mould under pressure to obtain the thermal-conductive silicone rubber with good mechanical properties.
采用双辊混炼机将导热助剂(石墨、炭黑、氧化铝)分散到有机硅橡胶中，配以过氧化物硫化剂，经模压硫化制备了兼具导热性和力学性能佳的导热硅橡胶。
补充资料：导电硅橡胶
分子式：
CAS号：
性质：具有普通硅橡胶的耐高低温、耐老化、易成型加工等特性外，导电稳定性和热稳定性良好，体积电阻率一般在3～10Ω·cm，相对密度1.15，硬度(邵氏A)60，拉伸强度5.7MPa，相对伸长率265%。可由甲基乙烯基硅橡胶(生胶)、白炭黑、导电填料、结构控制剂以及有机过氧化物等配合混炼而成。用于导电键钮、导电硅橡胶辊、印刷电路和集成电路以及显示器之间的连接。
CAS号：
性质：具有普通硅橡胶的耐高低温、耐老化、易成型加工等特性外，导电稳定性和热稳定性良好，体积电阻率一般在3～10Ω·cm，相对密度1.15，硬度(邵氏A)60，拉伸强度5.7MPa，相对伸长率265%。可由甲基乙烯基硅橡胶(生胶)、白炭黑、导电填料、结构控制剂以及有机过氧化物等配合混炼而成。用于导电键钮、导电硅橡胶辊、印刷电路和集成电路以及显示器之间的连接。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条