说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 形变储能
1)  deformation stored energy
形变储能
1.
The relationship between deformation stored energy and secondary recrystallization texture was analyzed in order to clarify forming mechanism of secondary recrystallization texture.
利用X射线衍射技术测定了双取向硅钢的微结构和织构,分析了形变储能与二次再结晶织构之间的关系,以探讨二次再结晶织构形成的机制。
2.
Microstructure revolution of hot-rolled strip was investigated for non-oriented silicon steel by using concepts of deformation stored energy,fault energy,cross slipping,phase transformation,phase transformation and precipitation inducted by deformation as well as re-crystallization inducted by phase transformation and strain and stress.
运用形变储能、层错能、交滑移、相变、形变诱导相变和析出、相变应力应变诱导再结晶等概念和有关原理探讨了热轧组织演变规律,并分析了4种不同成分钢种热轧组织的形成机理。
2)  stored energy
变形储存能
1.
The distributions of the stress, strain and stored energy in hot deformed austenite were simulated by crystal plasticity finite element method (CPFEM) to evaluate quantitatively the deformation behavior on a mesoscale.
为了定量描述热变形奥氏体在介观尺度上微观变形的非均匀性,采用晶体塑性有限元方法(crystal plasticity finite element method,CPFEM)模拟了C-Mn钢在不同变形条件下的变形行为,得到了在介观尺度上奥氏体的微观应力应变和变形储存能分布。
2.
The dislocation density and stored energy of hot deformation were calculated to evaluate quantitatively the effect of hot plastic deformation of austenite oil the kinetics of subsequent, ferrite transformation.
为了定量考虑热变形对普碳钢奥氏体向铁素体转变的影响,计算了热变形的C-Mn钢中的位错密度和变形储存能。
3)  displacement capacity reservation
变形能力储备
1.
The concept of displacement capacity reservation in seismic design of highway bridges is put forward.
针对我国公路桥梁抗震设计现状,指出当前迫切需要改进的一些问题,并提出桥梁结构抗震设计应在满足强度需求的同时,还应着重于结构变形能力储备—即延性能力储备的抗震思
4)  Shape Stable And Energy Store Phase Change Material
定形相变储能材料
5)  phase-change energy storage
相变储能
1.
A novel spontaneous melt infiltration methodology was developed for the preparation of phase-change energy storage materials.
研究了融盐Na2SO4与石英质多孔陶瓷预制体的自发熔融浸渗制备工艺,成功地制备出无机盐/陶瓷基(Na2SO4/SiO2)复合相变储能材料,观察和分析了该材料的物相组成与显微结构特征,对该材料的各项热物理性能和机械性能进行了测量。
2.
The salt/ceramic(Na_2SO_4/SiO_2) composite phase-change energy storage materials were fabricated successfully by molten Na_2SO_4 infiltrating porous ceramics preforms spontaneously.
本文探索了Na2SO4/SiO2无机盐/陶瓷基复合相变储能材料的自发熔融浸渗工艺制度。
6)  phase change energy storage
相变储能
1.
Studied for epikote-sodiam dihydrogen phosphate complex material of phase change energy storage;
环氧树脂-磷酸氢二钠复合相变储能材料的制备与性能研究
2.
Research on Properties of SiO_2/Na_2SO_4 Composite Phase Change Energy Storage Materials;
复合定型相变储能材料SiO_2/Na_2SO_4的性能研究
3.
The utilization status of waste heat resources in our country are analyzed and compared from classification, production, energy saving, environmental protection, and practical technology of industrial used storage materials, and the application progress of phase change energy storage materials in industry waste heat recovery is introduced.
从目前工业应用的蓄热材料的分类、生产、节能、环保和实用技术等方面对国内余热资源的利用现状进行了较为全面系统的分析和比较,并介绍了相变储能材料在工业余热回收方面的应用进展。
补充资料:超导储能(storedenergyofsuperconductivity)
超导储能(storedenergyofsuperconductivity)

由于超导磁体环流在零电阻下无能耗运行,所以超导线圈中可持久地储存电磁能,且在短路情况下运行,称超导储能。它的优点在于:⑴一次储能可长期无损耗地保存,又可瞬时放出;⑵储存能量高,现已可达107J/m3以上;⑶用低压电源励磁即可;⑷装置体积小;⑸节省了常规所需的送变电设备和减少送变电损耗。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条