1) porcelain powder
瓷粉
2) Ceramic powder
陶瓷粉体
1.
The effect of hydrothermal method on properties of ceramic powders;
水热法工艺对合成陶瓷粉体性能的影响
2.
Synthesis of Ba_(0.7)Sr_(0.3)TiO_3 ceramic powder by complex precursor route;
络合溶胶-凝胶法制备Ba_(0.7)Sr_(0.3)TiO_3陶瓷粉体
3.
Synthesis of (1-x)Ca_(0.4)Sm_(0.4)TiO_(3-x)Li_(0.5)Nd_(0.5)TiO_3 ceramic powder by EDTA precursor;
EDTA络合法合成CSLNT陶瓷粉体
3) ceramic powders
陶瓷粉末
1.
Synthesis and analysis of boride ceramic powders;
硼化物陶瓷粉末的合成与分析
2.
borides and composite ceramic powders.
采用自蔓延高温还原合成方法制备TiB2,TiB2-A l2O3和ZrB2-Al2O3陶瓷粉末。
3.
The base principle,key technology,characteristic and progress on synthesis of ceramic powders by solid-state metathesis reactions are described.
本文扼要地介绍了固态复分解反应法制备陶瓷粉末的基本原理、关键技术、特点及其研究进展。
4) ceramic powders
陶瓷粉体
1.
Study on the preparation of ceramic powders of ternary pyrochlor containing bismuth by coprecipitation;
共沉淀法制备三元系铋基焦绿石型陶瓷粉体
2.
The development trends of ZnO varistor ceramic powders;
氧化锌压敏陶瓷粉体的研究进展
3.
In this paper, the dispersion mechanisms of nano ceramic powders were introduced,mainly including electrostatic stabilization, steric stabilization and elctrosteric stabilization.
介绍了纳米陶瓷粉体的几种主要分散机理:双电层(静电)稳定机制,空间位阻稳定机制,静电位阻稳定机制;根据不同的稳定机制可以得出相应的影响因素及控制方法。
5) ceramic powder
陶瓷粉
1.
In this paper, hydrophilic property resin was prepared by glycine conferred hydrophilicity, then it was mixed with ceramic powder, and epoxy resin ceramics coating was prepared as prouduct.
所制得的水性环氧乳液与陶瓷粉混合,在固化剂的作用下,得到了环氧树脂陶瓷涂料。
2.
Ultrafine ceramic powders of Sr0.
1)O_(3-δ)(SCY)超细陶瓷粉。
3.
Tribological and tensile properties of nylon 1010 composite,filled with micro scale ceramic powder with surface treatment by silane coupling agents(KH-550),was investigated.
以微米级有机陶瓷粉末为增强材料,用KH-550硅烷偶联剂对陶瓷粉末进行表面处理制备出陶瓷/尼龙复合材料,在环-块摩擦磨损试验机上评价了陶瓷/尼龙复合材料与钢配副的摩擦磨损性能,并对其力学性能进行测试。
6) ceramic chalk
陶瓷粉笔
参考词条
补充资料：烤瓷粉
分子式：
CAS号：
性质：在牙科烤瓷工艺中，进行烧结加工制作烤瓷修复体所采用的粉状瓷料。有长石质烤瓷粉和氧化铝质烤瓷粉两大类。前者包括体瓷和釉瓷。体瓷由长石、石英、白陶土、硼砂、硅石、氧化铝、着色剂、结合剂等组成；釉瓷由石英和硼砂等组成。而氧化铝质烤瓷粉除上述各组分外，还含有40％～50％的α-Al2O3结晶体。用烤瓷粉制作的烤瓷修复体光学性能好，色泽稳定，生物学性能佳，但机械强度较差。用于制作烤瓷全冠、瓷牙、嵌体、烤瓷桥等。
CAS号：
性质：在牙科烤瓷工艺中，进行烧结加工制作烤瓷修复体所采用的粉状瓷料。有长石质烤瓷粉和氧化铝质烤瓷粉两大类。前者包括体瓷和釉瓷。体瓷由长石、石英、白陶土、硼砂、硅石、氧化铝、着色剂、结合剂等组成；釉瓷由石英和硼砂等组成。而氧化铝质烤瓷粉除上述各组分外，还含有40％～50％的α-Al2O3结晶体。用烤瓷粉制作的烤瓷修复体光学性能好，色泽稳定，生物学性能佳，但机械强度较差。用于制作烤瓷全冠、瓷牙、嵌体、烤瓷桥等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。