1) compound cleaning technique
复合清洗工艺
1.
Application of compound cleaning technique for scale tubing;
结垢油管复合清洗工艺技术研究与应用
2) Cleaning Process
清洗工艺
1.
The cleaning process for the color-coated sheet line is introduced, the cleaning agent and the controlof the cleaning process are discussed, the factors which have influence on the cleaning quality and the resulting defects are analyzed.
介绍了彩色卷钢生产线清洗工艺,对清洗剂和清洗工艺控制进行了探讨,并分析了影响清洗质量的因素和可能导致的缺陷。
2.
Based on the high requirements of precision mask processing on quality,the pellicle mount was done and the precision cleaning process was improved,final process was completed with experiments.
通过一系列研究分析,找到了传统掩模清洗工艺的一些缺点和局限性,借鉴和参考了传统掩模清洗工艺,克服了其局限性。
3.
The paper discusses the strip cleaning process and technical parameters on No.
3镀锌线的清洗工艺、技术参数等进行讨论。
3) cleaning technology
清洗工艺
1.
Research on the Cleaning Technology and Equipment for Precision Parts;
精密零件清洗工艺研究及设备研制
2.
This paper introduce the cleaning technology of the processing hydraulic element and the application of the water base metallic detergent.
通过对液压件生产中清洗工艺的论述及水基金属清洗剂的应用和试验 ,阐明了液压元件的清洗工艺过程及清洗剂的选用 ,为液压元件上等级提供了技术保
3.
The strip cleaning technology is introduced, and this method can eliminate the effect of surface residuals on next procedure.
带钢表面的清洗 ,主要解决带钢表面残留物对后部工序的影响问题 ,由于残留物的性质不同 ,清洗工艺也不一样 ,针对带钢连续热镀锌机组的预清洗工艺、技术参数等进行了讨论。
4) back washing technology
复洗工艺
5) composite cleaning
复合清洗
1.
The composite cleaning technical project was designed as "double flow penhold pig plus chemical cleaning" and the chemical cleaning agent was confirmed by experiments.
设计了"双向直板型清管器+化学药剂清洗"的复合清洗工艺方案,并通过实验对化学清洗剂进行了确定,采用无毒、无污染的D-柠烯、AQ-11和AQ-12分别作为油溶性清洗剂、乳化剂和水溶性清洗剂。
2.
Some methods to clean pH electrode are introduced,such as ultrasonic cleaning,mechanical cleaning,water jet cleaning,chemical solution jet cleaning,compressed air jet cleaning,composite cleaning,manual cleaning,and so on.
介绍了超声波清洗、机械刷洗、水喷射清洗、化学溶液喷射清洗、压缩空气喷射清洗、复合清洗、人工清洗等 pH电极清洗方法 ,并给出电极内部陶瓷砂芯的清洗方法。
6) pre-rinsing process
预清洗工艺
1.
Optimization of pre-rinsing process for improvement in color sheet quality and reduction of water consumption;
提高彩板质量和降低水耗的预清洗工艺
补充资料：高聚物基复合材料模压工艺
高聚物基复合材料模压工艺
compression molding of polymer matrix composites
高聚物基复合材料模压工艺。ompression mold-i眼of pol卿er matrix eomposites在封闭的模腔内，借助加热和压力固化成型复合材料制品的方法。是广泛使用的一种制造复合材料制品的工艺方法。用它制造的产品质量高，成本低，操作人员技能对产品质量影响不大。所用原材料极为广泛，但最适于使用片状模塑料的团状模塑料。 用模塑料成型制品时，装入模内的模塑料，由于与模具表面接触加热，粘度迅速减小，在3一7 MPa成型压力下，就可以平滑地流到模具的各个角落。模塑料遇热之后，迅速凝胶和固化。依据制品的尺寸和厚度，成型时间从几秒钟到几分钟。 模压工艺特别适用于制造大批量以及精度和重复性要求比较高的制品，如广泛用于生产家用制品、机壳、电子设备和办公室设备的外壳、卡车门和轿车仪表板等汽车部件，也用于制造连续纤维增强制品，但是纤维阻止了预浸料在模内的流动。这类材料主要用于生产壁厚不变、曲率比较小的部件。当生产批量为几千件以上时，一般使用钢模，或表面作适当处理的钢模。在生产批量比较少或产品开发阶段，模具也可以用高强度环氧树脂浇铸而成。(刘其贤)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条