1) steel sheet
板钢
1.
Its application in the continuous production line of steel sheet is emphasized.
短波红外加热技术具有能量密度高、穿透性强、响应速度快、可控性良好、生产效率高及设备空间节省等优点,应用于国内高端的耐指纹电镀锌板钢生产中。
2) ship steel plate
船板钢
1.
Microstructures and mechanical properties of joints of microalloyed EH40 ship steel plate with high heat-input welding;
微合金EH40型船板钢大热输入焊接接头组织和力学性能
2.
The microstructure and properties of welded joint of EH40 grade ship steel plate by submerged-arc welding process were analyzed.
对EH40船板钢埋弧焊焊接接头的组织性能进行了试验分析。
3) ship plate steel
船板钢
1.
Design of controlled cooling technology after rolling of ship plate steel E36;
船板钢E_(36)轧后控冷工艺的制定
2.
The results indicated that the purity of the ship plate steel by the process was high.
高级别船板钢由于具有较高的强度和低温冲击韧性,要求冶炼的钢水有较高的纯净度,同时控制夹杂物的形态。
3.
By means of full automatic phase transformation tester(Formaster-Digital),Ac1,Ac3,Ar1,Ar3 of ship plate steel E36 and phase transformation point of specimen at different cooling rate were measured.
本文采用 Formaster-Digital 全自动相变仪测定了船板钢 E_(36)的 Ac1、Ac3、Ar1、Ar3,同时测定出了试样在不同冷却速度下的相变点,然后根据相变点绘制出了 E_(36)钢的奥氏体连续冷却转变曲线即 CCT 曲线。
4) Grade A Hull Plate Steel
A级船板钢
1.
Non-Metallic Inclusion in Grade A Hull Plate Steel Produced by 30 t Converter-Ladle Argon Stirring-Concasting Flowsheet;
30t转炉-钢包吹氩-连铸生产A级船板钢中的非金属夹杂
5) shipbuilding plate
船板钢
1.
The paper briefly intruduces the production technology of the modern high strength shipbuilding plate,especially chemical composition design,effect of the micro-alloy on the plates,analyses the relationship between mechanical properties and such factors as heating,control rolling and control cooling and points out the existing problem in domestic enterprises.
介绍了生产现代高强度船板钢的合金成分设计原则,微量元素Nb等合金元素的作用,分析了钢坯加热、控制轧制、控制冷却等因素与机械性能的关系,指出了国内主要生产高强度船板钢企业存在的问题,得出了获得高质量船板钢的具体工艺措施。
2.
The formation mechanism of surface fine cracks of shipbuilding plate containing Nb and Ti was studied The results show that the surface fine cracks are not developed but propagated in rolling process The surface fine cracks are formed in the mould along the crystal grain boundary The contents of Nb, Al and Cu etc in the steel are the main factors that affect the formation of surface fine crack
对含Nb、Ti船板钢中板表面微裂纹的形成机理进行了研究 ,结果表明 :中板表面微裂纹不是轧制时新产生的裂纹 ,而是由铸坯微裂纹扩展形成的 ;铸坯裂纹是在结晶器中形成的沿晶界裂开的表面微裂纹 ;影响铸坯微裂纹形成的主要因素是钢中铌、钛、铝含量和Cu等低熔点元素含量以及各种应力的作用。
6) sheet
薄板钢
1.
Taking into account the influence of various elements on the mechanical property of sheets such as Q235,Q345B and SS400,the quantitative relationships between the sheet with different component and mechanical property were researched on the basis of the stepwise regression analysis.
基于逐步回归分析法,从各种元素对Q235,Q345B,SS400等三种薄板钢力学性能的影响入手,研究了不同成分的薄板钢的化学成分与力学性能之间的定量关系。
参考词条
补充资料：邯钢集团舞阳钢铁公司九辊热矫直机矫直厚板
邯钢集团舞阳钢铁公司九辊热矫直机矫直厚板
邯钢集团舞阳钢铁公司九辊热矫直机矫直厚板
说明：补充资料仅用于学习参考，请勿用于其它任何用途。