1) polysulfone film
聚砜薄膜
1.
Then grafting of polymer brush on the surface of polysulfone film by sequential UV irradiation with 4-azidobenzoic acid as the photocoupler was carried out.
对在聚砜薄膜上接枝的聚乙二醇的形貌做了大量研究,探讨了在透明平整的无孔聚砜薄膜上接枝刷型聚乙二醇的条件。
2) Polyethersulfoneketone film
聚醚砜酮薄膜
1.
Internal structure changes of Polyethersulfoneketone film during pyrolysis in argon from room temperature to 950℃ were studied by Fourier transform infrared spectroscopy (FTIR).
用傅里叶变换红外光谱法研究了聚醚砜酮薄膜试样在氩气氛中,室温至950℃热解过程中固体残留物的内部结构的转变。
3) PES membrane
聚醚砜膜
1.
In situ cleaning of polluted PES membranes used in a membrane bioreactor was examined.
实验对已污染的聚醚砜膜进行了清洗的研究,并通过测量各种清洗剂清洗后膜水通量的恢复,确定适宜的清洗剂、清洗时间、清洗液浓度和操作压力,选择出最佳的清洗方案,取得较好的清洗效果。
2.
The banknote printing wastewater is treated by the PES membrane.
聚醚砜膜处理印钞废水。
4) polysulphone membrane
聚砜膜
1.
Adsorption behavior of soybean protein onto polysulphone membrane;
大豆蛋白在聚砜膜上的吸附行为
5) polysulfone membrane
聚砜膜
1.
Preliminary study of porcine hepatocytes cultured on organism interface of polysulfone membrane;
猪肝细胞在聚砜膜生物界面生长的初步研究
2.
The effect of solution chemistry including pH,ionic strength and bacterial cell concentration on the adsorption of bacterial cells onto a hydrophobic polysulfone membrane were studied.
研究了溶液化学特性 (包括pH值、离子强度和给液浓度 )对谷氨酸菌在疏水性聚砜膜上吸附行为的影响 。
3.
The PSF-500 of polysulfone membrane with a molecular weight cut-off(MWCO) of 50000 had the best effect on purification of flavonoids from leaves of Dendrocalamus latiflorus by ultrafiltration(UF) in contrast with five other membranes.
通过对5种超滤膜的对比研究,选择出切割分子量为50000D的聚砜膜PSF-500对麻竹叶黄酮有较好的分离纯化效果:产品得率高达4。
6) polyethersulfone membrane
聚醚砜膜
1.
Effect of polyethersulfone membrane on cytobiology character of astrocytes;
聚醚砜膜对星形胶质细胞生物学行为的影响
补充资料：聚砜/聚四氟乙烯共混物
分子式：
CAS号：
性质： 一般采用机械共混法共混。首先将干燥的粉状PSU树脂、悬浮法生产的PTFE树脂(为PSU的10％)及少量的亚磷酸三苯酯均匀混合，然后在挤出机中熔融混炼，再挤出造粒，即得PSU/PTFE共混物颗粒。所得共混物与PSU相比熔体黏度降低，耐应力开裂性得到改善，自润滑性和耐磨性显著提高。适于制造耐磨性零部件，如轴承保持架等，其寿命与酚醛基的相当。
CAS号：
性质： 一般采用机械共混法共混。首先将干燥的粉状PSU树脂、悬浮法生产的PTFE树脂(为PSU的10％)及少量的亚磷酸三苯酯均匀混合，然后在挤出机中熔融混炼，再挤出造粒，即得PSU/PTFE共混物颗粒。所得共混物与PSU相比熔体黏度降低，耐应力开裂性得到改善，自润滑性和耐磨性显著提高。适于制造耐磨性零部件，如轴承保持架等，其寿命与酚醛基的相当。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条