1) oil speed
油速
2) oil recovery rate
采油速度
1.
The method to calculate recovery efficiency by oil recovery rate;
利用采油速度确定油藏采收率
2.
Analysis of Development Results by Enhancing Oil Recovery Rate in Mian-12 Block of Bamianhe Oilfield
八面河油田面12区提高采油速度改善开发效果分析
3.
By using reservoir engineering methods and the relationship between dimensionless oil recovery index and water - cut in different types of waterflooding reservoirs, the impact of water - cut on liquid - producing capacity is understood, and the relationship of liquid withdraw rate and oil recovery rate is further studied.
辽河油区注水开发油田储层类型多样,油品性质多样,运用油藏工程方法,利用不同类型注水开发油藏无因次采出指数与含水关系,明确了不同类型油藏含水变化对产液量的影响规律,并进一步研究了注水开发油藏采液速度与采油速度的关系。
3) rate of oil production
采油速度
1.
Research on relationship of rate of oil production with stable production period and decline rate in fresh developing zone;
新区采油速度与稳产时间、递减率变化关系研究
4) oil production rate
采油速度
1.
Overall water cut of Wenchang13-1 oil field has come to 60% and oil production rate dropped obviously compared with that of the early producing stage.
文昌13-1油田综合含水已达60%,采油速度相对开采初期明显下降。
2.
The effect of well network regulating on formation pressure,oil production rate and declining rate is analyzed,we conclude that the production method of five-spot water flooding and diagonal crowding is much more effective than using other methods.
结果表明:考虑有效驱动因数的水驱采收率与注采井距关系式,可快捷进行水驱采收率计算;反九点井网平均地层压力低于五点法井网的平均地层压力;井网加密后,采液指数提高;通过分析井网调整对地层压力、采油速度、递减率等开发指标的影响,表明五点法注水、对角线加密方式优于其他注水方式和加密方式。
5) recovery rate
采油速度
1.
In the case of development by depletion,it is especially important to determine a reasonable oil recovery rate when establishing reasonable development plan.
对于衰竭式开采,在制定开发方案时,确定合理采油速度尤为重要。
6) low-speed oilfield
低速油田
1.
Taking the low-speed oilfields in Liaohe oil zone for example,a discussion is made of the three standards for screening low-speed oilfields.
以辽河油区低速油田为例 ,讨论了文献中提出的 3种低速油田筛选标准 ,提出了油藏剩余可采储量采油速度的低速油田筛选标准 ,有助于动态分析和掌握低速油田状况 ,正确认识开发阶段和开发效果 ,且排除了一些因采出程度高而形成的“低速”区块 ,更加符合油田实际。
补充资料：皂化溶解油、肥皂油和调水油
分子式：
CAS号：
性质：又称皂化溶解油、肥皂油和调水油。金属切削油的一类。一般是淡褐色至深褐以液体或半固体。由在矿物油中加入适量的皂类乳化剂（如钠皂、钾皂、松香钠皂、松香皂或环烷酸钠皂）和少量稳定剂（如乙醇或甲醇）而成。使用时与软水掺合成稳定的白色乳化液。作用以冷却为主，润滑为次。用于车制、锯断、钻孔、磨制等金属粗加工。
CAS号：
性质：又称皂化溶解油、肥皂油和调水油。金属切削油的一类。一般是淡褐色至深褐以液体或半固体。由在矿物油中加入适量的皂类乳化剂（如钠皂、钾皂、松香钠皂、松香皂或环烷酸钠皂）和少量稳定剂（如乙醇或甲醇）而成。使用时与软水掺合成稳定的白色乳化液。作用以冷却为主，润滑为次。用于车制、锯断、钻孔、磨制等金属粗加工。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条