1) counter-pressure casting machine
压差铸造机
1.
The theory of counter-pressure casting machine together with its advantages and disadvantages is discussed in this paper,and the development of the liquid surface pressure control system for counter-pressure casting machine method is reviewed as well.
阐述了压差铸造机的工作原理和特点,分析了其优点和存在的问题,介绍了压差铸造机液面加压控制系统的发展过程;指出了自动液面控制的压差铸造机对于复杂薄壁铸件的生产有着明显的优势,同时指出了液面加压系统的发展趋势。
2) counter-pressure casting
差压铸造
1.
Production of High Quality Aluminum Alloy Pressure-cooker by Counter-pressure Casting
铝合金压力锅差压铸造工艺研究
2.
The effect of counter-pressure casting parameters on secondary dendrite arm spacing (SDAS)of A357 alloy was studied.
研究了差压铸造不同工艺参数对A357合金二次枝晶间距的影响。
3.
The theory of counter-pressure casting together with its advantages is discussed in this paper.
论述了差压铸造的原理特点,回顾了差压铸造过程控制系统的发展,分析了差压铸造技术的国内发展现状,介绍了作者新近开发的真空调压铸造过程控制系统,最后指出了差压铸造技术的发展趋势。
3) counter pressure casting
差压铸造
1.
The Parameters Choice for Casting Process Design in Low Pressure Casting and Counter Pressure Casting;
低压及差压铸造工艺设计的参数选择
2.
Counter gravity casting equipments(CGCE),such as low pressure casting(LPC),counter pressure casting(CPC)and adjusted pressure casting(APC)equipments,have been extensive used in practice.
低压铸造、差压铸造及调压铸造等反重力铸造装备技术已在实际生产中得到广泛应用,但多数此类设备功能单一,无法在同一台设备上实现多种功能。
3.
The study and application of counter pressure casting were introduced in China these years.
介绍了近几十年来差压铸造技术在中国的研究进展和生产应用情况,指出差压铸造在生产大型复杂薄壁铝合金铸件方面的优势。
4) differential pressure casting
差压铸造
1.
Electrochemical Performance of Differential Pressure Casting Mg-Ni-Pr Based Amorphous Hydrogen Alloy
非晶态Mg-Ni-Pr储氢合金的差压铸造及电化学性能
2.
A brief introduction for mechanical design for differential pressure casting caldron was made,and a detailed introduction of fast-opening structure and seal structure of clinch type hoop was provided.
介绍了差压铸造釜机械设计 ,着重阐述了齿啮式卡箍快开结构和密封结构的设计。
5) differential air pressure casting method
差压铸造法
1.
The Cu47Ti33Zr11Ni8Si bulk amorphous alloy sample was prepared by the differential air pressure casting method and the three point-bending strength was tested.
采用差压铸造法制备了 Cu4 7Ti33Zr11Ni8Si块体非晶合金试样 ,测定了试样的三点弯曲强度。
6) Low pressure Casting Machine
低压铸造机
1.
Spring support structure for furnace of low pressure casting machine and its propeties are devoted in the article which also illustrates the basis and the key points of design as well as its applicaion effect.
本文介绍了低压铸造机炉体弹簧支撑结构及其特点。
补充资料：压塑压机
分子式：
CAS号：
性质：指塑料压塑模塑用的压机，一般用自给式液压机，通过模板对塑料施加压力、开闭模具和顶出制品。主要参数有公称吨位、压板尺寸、工作行程和柱塞直径，它们决定着压机所能模压制品面积的大小、厚度以及所能达到的最大模压压力。从结构上分，有上压式和下压式压机；按操作分，有手动、半自动和全自动压力。
CAS号：
性质：指塑料压塑模塑用的压机，一般用自给式液压机，通过模板对塑料施加压力、开闭模具和顶出制品。主要参数有公称吨位、压板尺寸、工作行程和柱塞直径，它们决定着压机所能模压制品面积的大小、厚度以及所能达到的最大模压压力。从结构上分，有上压式和下压式压机；按操作分，有手动、半自动和全自动压力。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条