2) Ni-P/Ni-B double composite plating
Ni-P/Ni-B双层复合镀
1.
The process flow and applications of electroless Ni-P alloy, Ni-W-P ternary alloy, Ni-P/Ni-B double composite plating and Ni-P-particle composite plating on aluminum alloy were summarized.
本文分析了铝合金化学镀的特点,综述了铝合金化学镀Ni-P合金、Ni-W-P等三元合金、Ni-P/Ni-B双层复合镀及Ni-P-微粒化学复合镀的工艺流程及应用。
3) Ni-P plating
Ni-P镀层
1.
In this paper the properties of electroless Ni-P plating are briefly described,and the application of this process in industry is fairly minutely introduced.
简述了化学镀Ni-P镀层的性能,并较详细地介绍了该工艺在工业生产中的应用。
2.
The Ni-P plating and Ni-P-SiC composite coating were prepared using electroless deposite method on the surface of low-alloy cast iron.
作者利用化学沉积法在低合金铸铁表面分别制取了Ni-P镀层和Ni-P-SiC复合镀层,并就两者的耐磨性与铸铁、磷化处理表面及Cr镀层的进行了对比试验研究。
3.
The acidic-alkaline composite deposits composed of alkaline Ni-P plating as bottom film and acidic Ni-P plating as top film could provide the best protection,and the corrosion resistance of single acidic Ni-P deposit was better than that of single alkaline Ni-P deposit.
5%NaCl溶液中的极化曲线,对比分析了酸性和酸碱复合条件下所得Ni-P镀层的表面形貌。
4) Ni-P coating
Ni-P镀层
1.
Effect of mechanical attrition on microstructure and property of electroless plating Ni-P coatings on magnesium alloy;
机械研磨对镁合金化学镀Ni-P镀层结构及性能的影响
2.
Effect of a Ni-P coating on the tensile strength of carbon fibers evaluated by a Weibull statistical method;
用Weibull统计方法评价Ni-P镀层对炭纤维抗拉强度的影响
3.
The impact of NH_4Cl,NaF and organic compound M on the deposition rate of Ni-P coating is discussed,and the surface morphology,adhesion and corrosion resistance against nitric acid of the coatings are investigated.
结果表明:三种物质都可以作为镀液的加速剂,合理控制它们的比例所形成的复合加速剂可以使加速效果达到最佳状态,而且此时的Ni-P镀层具有良好的表面质量、结合强度和耐蚀性。
5) Ni-B coating
Ni-B镀层
1.
Corrosion electrochemical behavior of a directly electroless-plated Ni-B coating on magnesium alloy was investigated by means of potentiodynamic and electrochemical impendence spectroscopy(EIS).
研究了镁合金表面化学镀Ni-B合金的电化学行为,采用电化学动电位扫描极化曲线和交流阻抗研究了Ni-B镀层的腐蚀电化学行为,结果表明,Ni-B镀层在3。
6) Ni-P/Ni-B double layer composite coating
Ni-P/Ni-B双层复合合金镀层
1.
The operation method,the craft condition and main functions of Ni-P/Ni-B double layer composite coating on aluminium alloy by electroless plating are researched.
为了解决雷达波导管内表面既具有优良导电性能又耐臭氧腐蚀的技术要求,对铝合金化学镀Ni-P/Ni-B双层复合合金镀层的操作方法、工艺条件及主要性能进行了研究,结果表明,若用Ni-P/Ni-B化学镀层替代电镀银层,导电性能有所降低,而耐臭氧腐蚀性能明显增强。
补充资料：磁性镀层
分子式：
CAS号：
性质：用于提高某些金属或非金属零件的磁性要求的电镀层。如录音机或电子计算机等设备中的录音带、磁环线、记忆鼓等储存系统，一般镀镍铁、镍钴、镍铬磷等合金。通过改变电镀工艺参数，可获得不同性能的磁性镀层。
CAS号：
性质：用于提高某些金属或非金属零件的磁性要求的电镀层。如录音机或电子计算机等设备中的录音带、磁环线、记忆鼓等储存系统，一般镀镍铁、镍钴、镍铬磷等合金。通过改变电镀工艺参数，可获得不同性能的磁性镀层。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条