1) blending effects
混料效果
1.
Analysis on the blending process for rigid PVC-U products and the blending effects;
PVC-U硬制品混料工艺及混料效果分析
2) blending efficiency
混匀效果
1.
Application and research of raising blending efficiency;
提高堆积混匀效果的研究及应用
2.
In order to improve blending efficiency of raw material, The Raw Material Plant of Jigang has adopted some advanced measures included doing scientific management for raw material storage, practicing automatic control and automatic sampling for blending, selecting reasonable raw material piling layer and advanced production technique, etc.
为了提高原料混匀效果 ,济钢原料厂对进厂原料存储进行科学管理 ,对混匀配料进行自动控制及自动取样 ,选择合理的堆料层数和先进的生产工艺 ,使得中和料质量有了明显提高 ,其主要成分指标TFe和SiO2 一级品率分别由 2 0 0 0年的5 9 3 3 %和 5 8 44 %提高到 2 0 0 3年的 80 90 %和 86 2 5 %。
3.
Various effecting factors of blending efficiency and some measurements for improveing blending efficiency were analyzed.
阐述了原料混匀对高炉冶炼的重要性，分析了影响混匀效果的各种因素和提高混匀效果的各种措施，介绍了混匀效果的评价方
3) coagulation
[英][kəu'ægju'leiʃən] [美][koægjə'leʃən]
混凝效果
1.
The effect of Al/Si molar ratio and the preparation technique on the coagulation of polyaluminum silicate chloride (PASC) was studied, and the coagulation efficiency of PASC was also compared with that of polyaluminum chloride (PAC) by jar test.
研究Ａｌ／Ｓｉ摩尔比及制备工艺对聚硅氯化铝（ＰＡＳＣ）混凝效果的影响，比较ＰＡＳＣ和聚合氯化铝（ＰＡＣ）的混凝效果。
4) mixing performance
混合效果
1.
The improvement of mixing performance of a newly developed quench mixer and its commercial applications are described.
介绍了新型急冷混合器的适用范围及其对混合效果的改善情况、对内构件结构简化的贡献、工业应用实例。
5) mixing effect
混炼效果
1.
And introduced the mixing effect of the equipment stressly.
并对几种设备的混炼效果作了重点介绍。
2.
The result shown that disc mixing extruder was more better than single screw extruder and inset disc extruder was better than spiral disc extruder in mixing effect.
采用端面混炼挤出机和单螺杆挤出机对ＬＤＰＥ／ＣａＣＯ３，ＬＤＰＥ／ＳＢＳ混合体系进行挤出混炼效果研究，通过显微照片和图像分析仪对共混物亚微观混炼效果进行数学统计分析，发现端面挤出机混炼效果明显优于单螺杆挤出机，而端面混炼挤出机端面结构不同，混炼效果也有较大差异，以镶嵌盘混炼效果较佳。
6) coagulation effect
混凝效果
1.
Structure characterization and coagulation effect of nano-sized poly-aluminum-chloride with high content of Al_(13) species.;
高Al_(13)纳米聚合氯化铝的结构表征及混凝效果
2.
By experiment, the coagulation effect, influence factors of the backwashing wastewater in the groundwater works for iron and manganese removal have been investigated, and its coagulation mechanism has been discussed.
结果表明,CPF和PAM的混凝效果最好,氯化铁次之,PAC较差,硫酸铝最差;含铁量为100mg/L左右的冲洗废水自然沉淀效果较差,而投加少量混凝剂后,这种冲洗废水可在较短的时间内获得很好的沉淀效果;在混凝后的最初的10￣30min内,废水上清液的含铁量急剧下降,此后随着沉淀时间的增加,上清液含铁量缓慢降低;当pH值为7。
3.
The influences of experimental conditions on the alkalify degree and coagulation effect were investigated.
考察了原料配比、温度、时间、pH值、稳定剂等因素对聚合硫酸铝盐基度和混凝效果的影响,得最适宜的工艺条件:Ca(OH)2与Al2(SO4)3物质的量比=1。
补充资料：预混料
分子式：
CAS号：
性质：指橡胶与聚乙烯等塑料，或与再生胶、纤维等需要单独塑化、精炼，而预先制成的母料。
CAS号：
性质：指橡胶与聚乙烯等塑料，或与再生胶、纤维等需要单独塑化、精炼，而预先制成的母料。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条