1) intense cooling technology
激冷处理工艺
2) laser heat treatment process
激光热处理工艺
1.
The laser heat treatment process and mechanism on the surface of piston ring groove were studied.
对活塞环槽表面的激光热处理工艺与机理进行了试验研究。
3) cold shock treatment
冷激处理
1.
The strawberry variety" Fengxiang"was used to study the effects of cold shock treatment (CST) on the quality during storage.
本实验以"丰香"草莓为材料,研究了不同强度的冷激处理对果实贮藏期间品质的影响。
2.
Cold shock treatment inhibited the activities of polygalacturonase and amylase, and delayed the degradations of pectin and starch which resulted in a delay in fruit softening and a maintainance of fruit firmness.
以‘巴西’香蕉 (Musanana‘Baxi’)为材料 ,研究了冷激处理对果实常温下后熟软化的影响。
3.
Yizhou papaya was used to investigate the effect of cold shock treatment (CST) on soluble solids, vitamin C, titratable acids, hardness and weight loss rate.
以沂州木瓜为试材,研究不同时间冷激处理对沂州木瓜可溶性固形物、VC、可滴定酸、硬度和失重率的影响。
4) chilling treatment
激冷处理
1.
FEA of the residual stress field of TIG remelted layer at weld toe after chilling treatment;
焊趾TIG重熔层激冷处理后残余应力场有限元分析
5) Treatment process
处理工艺
1.
The treatment process of gas compounds of nitrogen and oxygen in hydrometallurgical process;
金、银湿法冶炼过程中氮氧化物气体处理工艺的可行性选择
2.
Evaporation treatment process of refuse landfill leachate;
垃圾填埋场渗滤液的蒸发处理工艺
3.
Impacts of wastewater treatment process on AOB and bacteria communities
污水处理工艺对氨氧化菌及细菌群落的影响
6) processing
[英]['prəʊses] [美]['prɑsɛs]
处理工艺
1.
Effects of different alloying elements on TRIP steels were described in detail and the processing applied respectively to hot rolled and cold rolled TRIP steels was introduced in order to offer information for trial production of TRIP steels.
为了给TRIP钢的试制提供参考,对各种合金元素在TRIP钢中的作用进行了描述,并介绍了热轧和冷轧TRIP钢的处理工艺。
2.
The solidification structure and mechanical properties under different ultrasonic processing are analyzed through metallographic structure and the test of their mechanical properties.
通过金相组织分析和力学性能实验,研究了不同的功率超声处理工艺对Sn-Sb合金凝固组织和力学性能的影响,分析了功率超声空化和声流在凝固过程中的作用情况,得出了功率超声最佳的处理工艺,并对超声波的空化和声流作用在金属凝固过程中的变化情况进行了论述。
3.
Surface residual stress distribution of duplex phases titanium alloy(ZT4) castings in the case of different successive processing are investigated.
对两相钛合金ZT4(Ti-6Al-4V)铸件在不同的后处理工艺条件下表面的残余应力分布进行了研究。
补充资料：深冷处理
将钢制品冷至 0℃以下温度的处理方法。广义而言，这也是一种金属热处理。深冷处理的主要目的是促使淬火后的钢中残留奥氏体转变为马氏体，使残留奥氏体量减到最低限度。最常采用深冷处理的是高碳高铬工具钢和高速工具钢。这些钢淬火后含大量残留奥氏体。如回火前在－72℃深冷处理，再施以二次回火，可大大提高工件的尺寸稳定性。其他采用深冷处理的材料还有铬轴承钢、量具用钢、表面渗碳钢、马氏体不锈钢、马氏体时效钢等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条