1) Complex medium bed
组合基质床
2) Modular machine
组合机床
1.
Application of PLC in the Control of Bore Modular Machine;
PLC在钻孔组合机床控制中的应用
2.
This article introduces the automatic control system of 8-station drilling and boring modular machine with PLC and Touch Panel,and gives the hardware configuration and the principle to design software of the PLC control system according to the principle and control requirement of the machin
介绍了PLC与触摸屏控制的八工位钻镗组合机床自动控制系统。
3.
PLC was applied to thoroughly reform the original modular machine which consists of relays,contactors and solenoid valves,and discusses the function of control system and the design of hardware and software in detail.
应用PLC对继电器、接触器和电磁阀为主要器件组成的组合机床控制系统进行技术改造,详细地讨论了控制系统的功能以及软硬件的设计,实际使用表明系统获得了良好的控制效果。
3) Modular Machine Tool
组合机床
1.
Design of Fluid Drive and Electrical Control System for Bore Modular Machine Tool;
钻孔组合机床液压传动和电气控制系统的设计
2.
An example of the PLC programming method in modular machine tool automatic control;
组合机床自动控制PLC程序设计实例
3.
The application of lap valves for hydraulic system design of modular machine tool;
叠加阀在组合机床液压系统中的应用
4) combined lathe
组合车床
1.
The paper analysed and discussed the machine-shaping process of sintering machine forehead spider chain wheel cylinder,mainly discussed the manufacturing process of chain pulley cylinder using our company combined lathe.
通过对烧结机头部星轮的链轮筒体加工成型过程的论述、分析,重点论述了利用沈阳冶金机械有限公司组合车床车制链轮筒体的过程。
5) combined machine
组合机床
1.
This article discusses a distributed collaborative design about combined machine.
本文就组合机床的分布协同设计工作进行了论述,重点讲述了基于CORBA的分布协同设计系统框架及其构成,项目协同管理、协同计算与仿真、数据访问三种关键技术的解决,特别对分布状态下的互操作问题进行了详细的说明。
2.
Based on the large amount of standard units and prototypes in fixture design of combined machine of drilling and turning, the fixture design method based on 3D model of workpieces is presented, and the design methods of positioning, clamping, and guiding device are researched.
针对箱体类零件钻镗组合机床夹具设计中存在的大量标准件和典型结构提出基于被加工件三维模型的箱体类组合机床夹具设计方法,研究了夹具的定位设计、夹紧设计和导向设计。
3.
The cylinder blocks of Wuxi Diesel Engine Works are machined in combined machines with roller conveyors.
无锡柴油机厂柴油机气缸体加工是在组合机床 +传送带上完成的。
6) combined machine tool
组合机床
1.
This paper introduces the application of FXON PLC from Japan in combined machine tools.
介绍了日本三菱公司FXON系列PLC在两工位钻孔、攻丝组合机床上的应用;分析了组合机床的组成、功能及控制要求;给出了输入输出分配表;编制自动控制程序、状态转移图,并实现了故障检测诊断。
2.
The combined machine tool can make machining quality and productivity improved substantially,and so give forth good social and economic benefit.
通过制定切实可行的、合理的工艺方案,设计制造了四轴数控钻孔组合机床,加工质量和生产效率得到大幅度提高,经济和社会效益显著。
3.
combined machine tools that the flexible refitment of machines instead ofpurcbasing a new one with identical function can save investment of 130 000 yuan each.
通过对一批传统组合机床进行柔性化改造工程的技术经济分析，表明进行柔性化改造的设备比购置同样功能传统机床节约投资１３１元／台，１０年内平均节约费用７２７１８。
补充资料：组合模式或组合振动
分子式：
CAS号：
性质：在红外光谱中通常出现很多的弱吸收，组合模式或组合振动系指对应于两个或多个基本振动频率之和起源，它的弱吸收于多原子分子振动态相互作用的振子的非谐性。与基频振动及倍频所引起的吸收相比，这些吸收是比较弱的。
CAS号：
性质：在红外光谱中通常出现很多的弱吸收，组合模式或组合振动系指对应于两个或多个基本振动频率之和起源，它的弱吸收于多原子分子振动态相互作用的振子的非谐性。与基频振动及倍频所引起的吸收相比，这些吸收是比较弱的。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条