1)  Al film
铝层
1.
If the Al film on the bond pad is pierced through by the probe in wafer probing,the wire bond- ing strength and device reliability would be affected.
在芯片测试中,若引线焊盘上的铝层被探针扎穿,就会影响引线键合的牢固性和器件的可靠性。
2)  alumina coating
氧化铝层
1.
Preparation of alumina coating on stainless steel surface by cathodic plasma liquid deposition;
不锈钢表面阴极等离子体液相沉积氧化铝层
3)  Al-rich layer
富铝层
4)  aluminized coating
渗铝层
1.
The results showed that the aluminized coating could enhance the resistance of Q235A steel and eliminate the sulfuration occurred in the interface between oxide scale and metal.
结果表明,渗铝层可有效提高Q235A钢在高温钒化物中的抗蚀性能,且基本消除氧化物/基体界面间的硫化现象,但随腐蚀时间的延长和实验温度的提高,渗铝层会逐渐失去对基体的保护;灰分中低熔点化合物对表面膜的溶解、氧化、再次溶解是渗铝层失效的主要原因。
2.
The microstructure,corrosion resistance and micro-hardness of the aluminized coating were examined.
对渗铝层的组织结构、耐腐蚀性能、显微硬度等进行了研究,测量了该合金扩散渗铝前后试样的电化学腐蚀极化曲线。
5)  pure aluminum sheet
纯铝层
1.
Four points bending samples of LY12/A1/LY12 were prepared from explosive cladding sandwich plates with different thicknesses of pure aluminum sheet by electron beam welding of bulk LY12 to respective surfaces.
利用爆炸焊及电子束焊接方法制备了含不同厚度中间纯铝层的LY12/Al/LY12四点弯曲试样,并在纯铝层中预制了平行于界面的疲劳裂纹。
6)  aluminized layer
渗铝层
1.
The new process can not only present both thick and homogeneous aluminized layers on the iron and steel surface, but also leave catalytic agent porous enough after use, with a smoothly finished surface remaining on the test sample.
以２∶１的氧化铝加木炭粉为填充剂，１０％铝粉为供铝剂，３％氯化铵为催渗剂，可使铝粉含量降到１０％的新型固体渗铝工艺，不仅能在钢铁表面获得厚而均匀的渗铝层，而且渗剂用后松散性好，试样表面光洁，不存在传统固体渗铝工艺的粘结问题，渗铝件的抗高温氧化性及耐蚀能力远远高于未渗件并可与不锈钢相媲美。
参考词条
补充资料：玻璃纤维增强铝层压板
分子式：
CAS号：

性质：GRALL  由薄的经表面处理并涂底胶的铝合金板和玻璃纤维预浸料交替铺层，经加温加压固化而成的层压板。简称为GRALL。是纤维增强合金层压板的一种。除了具有纤维增强金属层压板的一般性能特点外其突出的优点是极好的疲劳性能，很高的强度，优异的断裂韧性。其他与ARALL基本相似。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。