说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 阻断机制
1)  mechanism for elimination
阻断机制
2)  A Probe on Investigation and Adjudication Separation Mechanism
侦审阻断机制初探
3)  damping mechanism
阻尼机制
1.
Internal friction peak and its damping mechanism for 6061Al alloy/SiC_p/Gr MMC;
SiC_p/Gr颗粒混杂增强6061铝基复合材料中的内耗峰及其阻尼机制
2.
The research progress of high damping magnesium alloys and magnesium based composites is briefly introduced in this article, and the influence of strain amplitudes, frequency, temperature, heat treatment and ingredients on the damping property of magnesium alloys is discussed, and the damping mechanisms and damping design of magnesium based composites are analyzed.
简要介绍了高阻尼镁合金及镁基复合材料的研究进展,叙述了应变振幅、频率、温度、热处理以及合金成分对镁合金阻尼性能的影响,分析了镁基复合材料的阻尼机制及阻尼设计。
3.
The damping property of Al-Fe-Mo-Si matrix composite damping materials Al-Fe-Mo-Si/Zn-Al and Al-Fe-Mo-Si/Al/Zn-Al prepared by rapidly solidified/powder metallurgy(RS/PM) process is studied by means of measure of dynamic mechanical property, and the damping mechanism of the materials is discussed.
通过对材料动态力学性能的测试,研究了采用快速凝固/粉末冶金工艺制备的Al Fe Mo Si基复合阻尼材料Al Fe Mo Si/Zn Al和Al Fe Mo Si/Al/Zn Al的阻尼性能,并对其阻尼机制进行了讨论。
4)  damping mechanisms
阻尼机制
1.
Their damping mechanisms were also introduced briefly.
包括几种典型的阻尼减振合金的成分和特点 ,以及使用过程中应注意的问题 ,还简要的说明了它们的阻尼机制。
2.
The material damping characteristic and its measuring parameters were introduced The status of research on the testing methods of damping capacity, damping alloys and their damping mechanisms were also reviewed In addition, the problems existing in the applications of conventional damping alloys were pointed ou
介绍了材料的阻尼特性及其表征参数, 综述了近年来在阻尼性能测试方法、阻尼合金及其阻尼机制等方面的研究现状, 并指出了传统阻尼合金在应用方面存在的问
5)  choke mechanisms
阻塞机制
6)  fracture mechanism
断裂机制
1.
Research on tensile properties and fracture mechanism of different sizes SiCP reinforced Cu matrix composites;
不同粒度SiC_P增强铜基复合材料拉伸性能及断裂机制的研究
2.
Structure and fracture mechanism of short fibre reinforced C/C-SiC composites;
短纤维C/C-SiC复合材料的组织结构与断裂机制
3.
Study on fracture mechanism of alumina bubble ceramic;
氧化铝空心球陶瓷断裂机制研究
补充资料:磁耦合机制和沙兹曼机制
      解释太阳系角动量特殊分布的两种理论。太阳质量占太阳系总质量的99.8%以上,但其角动量(动量矩)却只占太阳系总角动量的1%左右,而质量仅占0.2%的行星和卫星等天体,它们的角动量却占99%左右。太阳系角动量的这种特殊分布,是太阳系起源研究中的一个重要问题。1942年,阿尔文提出一种"磁耦合机制"。他认为,太阳通过它的磁场的作用,把角动量转移给周围的电离云,从而使由后者凝聚成的行星具有很大的角动量。他假定原始太阳有很强的偶极磁场,其磁力线延伸到电离云并随太阳转动。电离质点只能绕磁力线作螺旋运动,并且被磁力线带动着随太阳转动,因而从太阳获得角动量。太阳因把角动量转移给电离云,自转遂变慢了。
  
  1962年,沙兹曼提出另一种通过磁场作用转移角动量的机制,称为沙兹曼机制。他认为,太阳(恒星)演化早期经历一个金牛座T型变星的时期,由于内部对流很强和自转较快,出现局部强磁场和比现今太阳耀斑强得多的磁活动,大规模地抛出带电粒子。这些粒子也随太阳磁场一起转动,直到抵达科里奥利力开始超过磁张力的临界距离处,它们一直从太阳获得角动量。由于临界距离达到恒星距离的量级,虽然抛出的物质只占太阳质量的很小一部分,但足以有效地把太阳的角动量转移走。沙兹曼也用此机制解释晚于F5型的恒星比早型星自转慢的观测事实。晚于F5型的恒星,都有很厚的对流区和很强的磁活动,通过抛出带电粒子转移掉角动量,自转因而变慢。然而早于F5型的恒星,没有很厚的对流区,没有损失角动量,因而自转较快。
  

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条