1) replication complex
复制复合体
1.
Some viral proteins, host proteins and RNA virus composethe viral replication complex, which guides viral RNA synthesis rapidly andefficiently.
一些病毒蛋白和宿主蛋白以及病毒的RNA一起组成病毒复制复合体，高效迅速地指导病毒核酸的合成。
2) roll-bonding
轧制复合
1.
The technology of roll-bonding was applied to prepare the foaming precursor in this paper.
将轧制复合工艺应用于发泡预制体的制备,研究了粉末致密化过程与面板/芯层的结合机制。
2.
Author studied the production technology of aluminum foam sandwich prepared by roll-bonding/powder metallurgy foaming process in this paper,and analyzed the effect of main technological conditions on foaming structure of sandwich layer,and optimum technological parameters were finally obtained.
研究了采用轧制复合-粉末冶金发泡法制备的泡沫铝夹心板的生产工艺,探讨了主要工艺条件对芯层泡沫结构的影响,得到了优化的工艺参数。
3.
The dynamic temperature field during roll-bonding combined with high-frequency alternating current heating has been numerically simulated by a simplified model.
通过数值模拟获得了高频加热-轧制复合过程中的动态温度场。
3) composite control
复合控制
1.
Commensalism phenomenon of composite controlled flying saucer;
碟式飞行器复合控制的共栖现象
2.
Study of CMAC and PID composite control of active DC filter of HVDC system;
基于CMAC和PID的HVDC系统直流有源滤波器的复合控制研究
3.
Design of composite control based on expert、fuzzy、PID controller;
基于专家、模糊和PID复合控制的设计
4) combined control
复合控制
1.
Emulation analysis of digital arc welding inverter with combined control;
基于复合控制数字化弧焊逆变电源的仿真分析
2.
The Combined Control System Design of 0-E Theodoli Based on DSP2812
基于DSP2812的经纬仪复合控制系统设计
3.
Application of combined controller based on CMAC and PID in fin stabilizers
CMAC与PID的复合控制在减摇鳍中的应用
5) compound control
复合控制
1.
Exploratory investigation on tension compound control system for continuous hot rolling mill;
热连轧张力复合控制系统的探讨
2.
Research on robust PID-fuzzy logic-based compound control of follow-up systems;
基于鲁棒PID-模糊复合控制的随动系统研究
3.
Fuzzy PID compound control algorithm of rotary table servo system;
转台伺服系统模糊PID复合控制算法
6) sandwich rolling
复合轧制
1.
A powder-A1 plate sandwich rolling processing is proposed for preparation of aluminum alloy foam sandwich with a metallurgy bonding interface.
通过粉末-铝板复合轧制方法制备出一种界面为冶金结合的泡沫铝夹芯板。
2.
The foam aluminum sandwich panels with metallurgy bonding interface are prepared by the sandwich rolling method,the two Al face-sheets are stacked and mixed powders with foam agent are put between them,which are sandwich rolled and a foaming precursor is obtained,then it is foamed in heating furnace.
采用复合轧制的方法,即将带有发泡剂的混合粉末置于两铝面板之间进行复合轧制使之成为预制发泡体,然后再在炉中发泡的方法,制备界面为冶金结合的泡沫铝夹芯板,通过摆锤冲击实验,研究界面为冶金结合的泡沫铝夹芯板与胶接夹芯板的冲击性能的区别。
补充资料：染色体结合复合体
分子式：
CAS号：
性质：一种细胞器，出现于减数分裂过程中，染色体同源区域间居间的密切的成双配对。
CAS号：
性质：一种细胞器，出现于减数分裂过程中，染色体同源区域间居间的密切的成双配对。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条