2) flexural failure
弯曲破坏
1.
A force anlysis of flexural failure of high rockmass slope;
岩石高边坡弯曲破坏的力学分析
2.
It is significant to study the numerical simulation method of the flexural failure process of laminated beams reinforced with woven fabric.
机织物层合梁弯曲破坏全过程的数值模拟分析对揭示其破坏规律,评价其耗能能力,预测其极限承载能力都十分有益,并有望在一定程度上代替大量的实验。
3.
Based on the available references,three types of failures(flexural failure,punching failure and bond failure)are described in the paper.
本文通过对已有板柱节点试验结果的总结，得出了板柱节点的破坏形式包括冲切破坏、弯曲破坏和锚固破坏，分析了板柱节点发生各种破坏的条件，列举了几种改善后的节点形式，对研究和设计有一定的借鉴作用。
3) Breakthrough curve
突破曲线
1.
For the linear adsorption isotherm, an exact solution for the prediction of breakthrough curves (step response) in fixed-bed adsorbers packed with activated carbon fiber is obtained, that takes into account axial dispersion, intrefiber diffusion and external convective mass transfer resistance.
针对活性炭纤维吸附填充床,当吸附等温方程为线性时,考虑轴向弥散、纤维内扩散以及纤维外对流传质阻力,获得了阶跃进样时突破曲线的精确解以及拟对数概率密度函数近似解和二次方近似解。
2.
On the basis of hydrodynamic dispersion theory,an experimental set for dispersion test has been improved,and then NaCl is used as s tracer to measure the breakthrough curve of the solute with the help of a conductometer At last,the dispersivity is determined with an analytic metho
以水动力弥散理论为基础，根据改进的水动力弥散装置，以氯化钠作为示踪剂，用电导仪间接地测定溶质的突破曲线，最后用解析法确定地下水多孔介质中溶质迁移的弥散度。
4) breakthrough curves
突破曲线
1.
The orthogonal collocation method was used to simulate the mathematical model in order to predict the breakthrough curves.
建立了活性炭纤维填充床内多组分竞争吸附传质动力学模型 ,采用正交配置方法求解数学模型以预测突破曲线 ,从理论上探讨了竞争吸附平衡及吸附质在填充床内的轴向弥散、纤维内扩散和纤维外对流传质等因素对强、弱吸附组分突破曲线的影响。
5) Buckling failure
屈曲破坏
1.
The buckling failure of composite laminates with a surface notch is explored through experiments and analysis.
通过实验研究和理论分析探讨了含表面缺口复合材料层压板的屈曲破坏。
2.
However, if cold-formed members are used for load bearing short colunm, problems such as: capacity of bearable load and deformation; the fluence on the ultimate hearing capacity and buckling failure from various factors, like shape and size of the tube and stiffening rib; the applicability of relevant provisions of 《Technical Code of Cold-formed Welded Type Steel Structure》(GBJ18-8.
但如果用于中高层建筑受力构件，冷弯薄壁焊接型钢短柱，所能承受的荷载和变形能力究竟如何；钢管的形状、尺寸及柱内的加劲肋等许多因素对短柱的极限承载力、屈曲破坏等的影响；现行GBJ18－87《冷弯薄壁焊接型钢结构技术规范》中的有关条款是否适用，都是有必要加以探讨的。
3.
By considering the compressive failure and buckling failure in the rafting process,the mechanical models are established to calculate the rafting lengths of one dimensional rafting ice and twodimensional finger ice.
基于渤海海冰现场观测资料 ,分析了重叠冰的基本特征 ;综合考虑海冰重叠过程中的屈曲破坏和挤压破坏模式 ,建立了计算一维重叠冰和二维指状冰重叠长度的力学模型 ,并依此对不同冰厚条件下的海冰重叠长度进行了计算。
6) damage curvature
破坏曲率
补充资料：曲破
1.唐宋乐舞名。大曲的第三段称"破"，单演唱此段称"曲破"。节奏紧促，有歌有舞。宋代甚为流行，宫廷大宴时常同其他节目轮番演出。宋元南戏中也有用曲破的，似仅有吹奏乐曲而无舞蹈。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条