1) copper-based powder
铜基粉末
1.
Based on statistics of PM Association of China Steel Construction Society,the recent production of iron-and copper-based powders in China is reviewed and some suggestions for further development are put forward.
依据协会的统计数据,评述了我国当前铁基、铜基粉末的生产状况。
2) copper/copper based powder material
铜铜基粉末材料
3) copper-based metal powder
铜基金属粉末
1.
Mechanism of P element in selective laser sintering of copper-based metal powder;
磷元素对铜基金属粉末选区激光烧结作用机理
2.
Direct laser sintering of a multi-component copper-based metal powder,which consisted of a mixture of Cu,Cu-10Sn,and Cu-8.
对多组分铜基金属粉末(组分包括Cu、Cu-10Sn、Cu-8。
4) Cu-based metal powder
铜基金属粉末
1.
Densification mechanism of multi-component Cu-based metal powderin selective laser sintering process;
多组分铜基金属粉末选区激光烧结致密化机理
2.
Selective laser sintering of a multi-component Cu-based metal powder, which consists of high-purity Cu, pre-alloyed CuSn and CuP, has been successfully processed basing on liquid phase sintering mechanism.
对多组分铜基金属粉末(组分包括纯Cu,预合金CuSn和CuP)进行了选择性激光烧结试验,其成形机制为粉末部分熔化状态下的液相烧结机制。
3.
Experimental investigations on selective laser sintering(SLS) of multi-component Cu-based metal powder,which consists of pure Cu,pre-alloyed CuSn,and pre-alloyed CuP,were performed.
30 mm),对多组份铜基金属粉末(组份包括纯Cu,预合金CuSn和预合金CuP)进行了选区激光烧结(SLS)实验,其成形机制为粉末部分熔化状态下的液相烧结机制。
5) Cu-PM
铜基粉末冶金
1.
Emulating computational of braking shoes with copper matrix powder metallurgy (Cu-PM);
铜基粉末冶金闸瓦刹车仿真计算
2.
Study of High Temperature Fatigue Wear of Copper Powder Metallurgy (Cu-PM)Friction Material;
铜基粉末冶金摩擦材料高温疲劳磨损规律
3.
Study temperature distribution of braking shoes with copper-matrix powder metallurgy(Cu-PM);
铜基粉末冶金闸瓦温度场分布
6) copper-base powder
铜基合金粉末<冶>
补充资料：粉末铜合金
分子式：
CAS号：
性质：采用粉末冶金技术将铜粉和其他金属粉末直接成型的铜合金。常用的有Cul0Fe5Sn5Pb8C3SiO23MoSi合金、Cu50W合金、Cu50Cr合金和CuAl2O3合金。上列第一种铜合金主要用作刹车材料；Cu50W合金主要用于真空电路中，≤10kA的高压开关电接点，电火花放电电极；Cu50Cr合金用于真空开关电器；CuAl2O3合金有高的强度、导电和导热性，特别是有高的抗软化温度和再结晶温度，用于电阻焊机的电极、X射线管、微波管、混合电路封装、换向器、开关部件等。
CAS号：
性质：采用粉末冶金技术将铜粉和其他金属粉末直接成型的铜合金。常用的有Cul0Fe5Sn5Pb8C3SiO23MoSi合金、Cu50W合金、Cu50Cr合金和CuAl2O3合金。上列第一种铜合金主要用作刹车材料；Cu50W合金主要用于真空电路中，≤10kA的高压开关电接点，电火花放电电极；Cu50Cr合金用于真空开关电器；CuAl2O3合金有高的强度、导电和导热性，特别是有高的抗软化温度和再结晶温度，用于电阻焊机的电极、X射线管、微波管、混合电路封装、换向器、开关部件等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条