1) pore throat structure
孔-喉结构
2) pore throat structure
孔喉结构
1.
Characteristics of pore throat structure of Chang-6 oil-bearing bed in Ganguyi Oilfield,Ordos Basin;
鄂尔多斯盆地甘谷驿油田上三叠统长6油层孔喉结构特征及其影响因素
2.
Accordingly,it has set up the statistical relations between T_2 geometrical average value and parameters of pore throat structure from capillary .
采用低场核磁共振实验的方法研究了鄂尔多斯盆地大牛地气田上古生界石盒子组3段岩芯样品的核磁共振弛豫时间T2分布与由压汞毛管压力曲线所获得的孔喉半径分布之间的对应关系和转换方法,建立了T2几何平均值与毛管压力曲线孔喉结构参数之间的统计关系。
3.
This paper addresses the use and characteristic of capillary pressure curve,and discusses the relationship between stage filling mechanism of lenticular sand body and pore throat structure.
从毛管压力曲线用途及曲线方法本身特点出发,对透镜状砂岩体阶段式充注机理以及与孔喉结构的关系进行详细探讨。
3) hole
孔
1.
Flow friction characteristics of the holed-baffles;
开孔折流板流动阻力特性
2.
Numeric Control Machining of the Hole in the Body Parts of the Case;
箱体零件中孔的数控加工
3.
Correct measurement of position and size for screw hole in three coordinates;
三坐标对螺纹孔位置尺寸的测量方法的探索
4) pore
孔
1.
Zeolites with different structure and similar Si/Al ratio were evaluated on a pulse micro-reactor with 1-hexene to study the effect of pore structure of zeolites on isomerization performance of 1-hexene at catalytic cracking condition.
采用1-己烯为原料,对硅铝比相近、不同孔结构的沸石在脉冲微反装置上进行了评价试验,考察了FCC条件下沸石孔结构对烯烃异构化性能的影响。
2.
The results showed that "a" was mainly depended on the pore radius of t.
结果表明:常数a主要由加气混凝土砌块表层状况及其孔半径决定;毛细吸水系数s主要取决于加气混凝土砌块的总孔隙率、连通孔数量及孔的分布;结合加气混凝土砌块孔结构测试数据,分析了毛细吸水率与砌块内部的连通孔、气孔孔径大小及孔径分布等因素之间的关系。
5) holes
孔
1.
Study of finite elastic plane with multiple holes;
多孔有限弹性平面问题的研究
2.
Analysis of stress field of finite plates weakened by holes;
开孔有限板的孔边应力场分析
3.
A plate containing multiple elliptical holes or cracks is discussed, and a correspondin.
本文应用各向异性弹性力学的复变函数理论,用多保角变换的方法,导出了含有任意多个任意位置椭圆孔的各向异性复合材料板的多复变量应力函数表达式,然后在单位圆周上进行复Fourier级数展开,用待定系数法确定应力函数的未知系数,从而计算弹性板的应力场。
6) aperture
孔
1.
In order to improve the aperture’s machining quality,we develop the method of replacing common reamers by stepped reamers to machining the aperture.
为提高孔的加工质量,将铰刀的结构改为阶梯式。
2.
Rightness of dime nsions mark will directly affect machining process and precision , in particular dimensions mark on symmet ry structure of aperture and key slot in spares is to be drawn in accordance with symmetry shape tolerance an d demand in utterance and therefore the mark way is flexible .
尺寸标注是否正确将直接影响零件的加工难易和精度 ,尤其对于零件上孔、键槽等对称结构的尺寸标注 ,视其有无对称度形位公差要求和使用要求的不同 ,这些对称结构的尺寸标注形式也是灵活多变的 。
参考词条
补充资料：构构
1.关系恶化貌。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。