说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 芳核平均结构尺寸
1)  average dimensions of aromatic nuclear structure
芳核平均结构尺寸
1.
The authors considered that the average dimensions of aromatic nuclear structure in kerogen, which can be measured by the approach, properly reflect the maturity of marine carbonate.
应用固体~(13)C-NMR技术对下古生界,海相碳酸盐岩干酪根的化学组成和结构特征进行研究,提出应用该技术所测算的干酪根结构参数“芳核平均结构尺寸”能较准确地反映碳酸盐岩的热成熟度。
2)  average size
平均尺寸
1.
Surface morphology of the Si film was observed by scanning electron microscopy(SEM) and was found that the average size of Si nanoparticles prepared in different gas all increased initially and then decreased with distance between the target and the substrate increasing.
利用扫描电子显微镜(SEM)观察样品的表面形貌,并对晶粒尺寸进行统计分析,发现不同环境气体下,纳米Si晶粒平均尺寸均随衬底与靶的距离增加有着先增大后减小的规律;通过分析比较,同等条件下Ne气环境下制备的纳米Si晶粒平均尺寸最小。
2.
The average size estimation is an important way to control production quality in many fields, however, the method of traditional measurement by hand is very difficult to meet to the continual mechanized manufacture.
平均尺寸的检测在很多领域都是产品质量控制的重要手段,然而传统的手工测量方法很难适应于连续机械化生产的需要。
3)  structure size
结构尺寸
1.
Takeing the WFGD absorber design of a 600MW unit in Guangdong province as an example,the process design such as structure size,internal parts and anticorrosion are introduced.
结合广东某600MW机组吸收塔的设计实例,对吸收塔的结构尺寸、内部件及防腐等关键工艺设计进行了阐述,以便为国内同类型脱硫工程吸收塔的设计提供借鉴及参考。
2.
Based on theoretical analysis for the parameters of the star wheel loading machine,a certain way to confirmation the structure size of star wheel loading machanism of roadheader was introduced.
通过对星轮装载机构参数的理论分析,介绍了星轮结构尺寸的确定方法,并且给出了一种星轮装载机构的具体尺寸,在实际运行中,大大提高了掘进机的装载效率,为星轮装载机构的研究设计提供了参考依据。
4)  structural dimension
结构尺寸
1.
Computer Aided Design of Bicycle Frame Structural Dimensions;
自行车车架结构尺寸的计算机辅助设计
2.
Using the 600 MW unit absorber tower design in Guangdong as an example, this paper discusses some of the key techniques, such as structural dimension, internal parts and anticorrosion.
本文结合广东某600MW机组吸收塔的设计实例,对结构尺寸、内部件及防腐等关键工艺设计进行了阐述,以便为国内同类型脱硫工程吸收塔的设计提供借鉴及参考作用。
3.
The expression of structural dimension for gear-planar cam indexing mechanism are derived,reasonable product series and data are given.
导出了平面凸轮齿轮型间歇机构有关结构尺寸的求解式,给出了合理的产品系列及其数据。
5)  configuration size
结构尺寸
1.
The movement of particles in electrocyclone has been analyzed, aimed at forecasting its configuration sizes, a mathematics model of optimization size was developed.
对静电旋风分离器中尘粒的运动进行分析 ,建立了尺寸优化的数学模型 ,预测了其结构尺寸。
6)  structural size
结构尺寸
1.
The structural size,compressive crushing load,critical compression and density of gingko core are measured.
对银杏核的结构尺寸、压缩破坏载荷及临界压缩变形量、密度等物性参数的测定表明 :银杏核分级时以级差 1mm、分级数以 4级为宜 ;破壳机的挤压腔间隙至少应保证 2 。
2.
The influence on temperature and stress of ladle by the structural size and material parameters;
本文运用有限单元软件ANSYS,对不同内衬结构尺寸及不同材料参数情况下钢包的温度场和应力场进行了仿真,讨论了钢包各种参数对钢包温度场和应力场的影响。
补充资料:芳基,芳基二乙基-芳基-甲基苯二胺
CAS:68479-98-1
分子式:C11H18N2
中文名称:二乙基甲苯二胺;芳基,芳基二乙基-芳基-甲基苯二胺
英文名称:ar,ar-diethyl-ar-methyl-Benzenediamine;Diethyltoluenediamine;ar,ar-diethyl-ar-methylbenzenediamine;ar,ar-diethyl-ar-methyl-benzenediamin;diethyl tolamine
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条