说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 静力称衡法
1)  statics weighting method
静力称衡法
2)  method of hydrostatics
流体静力称衡法
1.
This article mainly compared jouly steelyard and physical balance are applied in measuring the density of the method of hydrostatics,the results show that jouly steelyard have more advantage and innovation.
本文通过焦利称与物理天平在流体静力称衡法中对密度测定的对比应用研究,提出使用焦利称测密度的优越性和新颖性。
3)  Hydrostatic Weighing
静力称量法
1.
Hydrostatic Weighing Method for High Density Hydrometer;
静力称量法测量重液密度计
4)  static equilibrium method
静力平衡法
1.
Cable tension identification of beam string structures by static equilibrium method;
静定张弦梁结构索力识别的静力平衡法
2.
On the basis of the stability theory, this article used static equilibrium method and energy method to derive the effective length formulas of subdivided web member, and then compared the results of these two methods with that of current code of steel structure design(GB50017-2003).
根据稳定理论,分别应用静力平衡法和能量法推导出再分式腹杆的计算长度公式,并把两种方法得出的结果与现有钢结构设计规范(GB50017—2003)有关计算长度公式进行了比较。
5)  static equilibrium
静力平衡
1.
Then,from the two aspects of energy balance and static equilibrium,the stress and strain of piles were analyzed,through which equilibrium.
首先对桩身变形能及所受外力做功进行了讨论并导出理论公式,然后从能量平衡与静力平衡两个角度对桩身单元的应力与应变情况进行分析,列出平衡方程并导出相应的计算公式,接着在考虑地基土的抗剪强度随深度与土性的变化相应呈线性增加的基础上,列出桩身单元能量平衡方程与位移协调方程的矩阵表达式,最后通过将矩阵表达式的联立迭代求解,计算出多层地基土中单桩桩侧摩阻力、桩身轴力及桩身变形。
2.
There are some defects on the static equilibrium hydraulic motor similarly.
传统曲轴连杆式径向油马达存在配流方式复杂、壳体和连杆制造困难等缺点,而静力平衡径向油马达柱塞所受到的侧向力较大,弹簧容易疲劳破坏,压力环容易啃伤柱塞底面,且这两种油马达工作时都浪费储存在压力油和缸体等构件中的弹性能。
6)  static balance
静力平衡
1.
Influence of the seal ring s compressibility within gear pump on the bush s static balance;
齿轮泵密封圈压缩量对衬套静力平衡的影响
2.
Using static balance method of slide body, normal force on slip circle and safety factor of resistant heave stability are calculated, and the analysing method is verified by the practical engineering example.
提出了采用滑动体整体静力平衡的方法,确定滑裂面上的法向力和抗隆起安全系数,并以工程实例加以验证。
3.
Based on the results of a mass of grouted concrete masonry tests,deformation compatibility and static balance,the mean compressive strength,f_g,m,is presented by strength ratio of grouted concrete and block.
根据国内大量灌芯混凝土砌块砌体轴心受压试验结果,结合变形协调和静力平衡条件,推导出反映芯柱混凝土与砌块强度比的灌芯砌体轴心受压强度平均值fg,m计算公式。
补充资料:称衡
1.抗衡﹐不相上下。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条