1) double-layer TOF
双层TOF
2) TOF SIMS
TOF-SIMS
1.
The fundamental problems of TOF SIMS applications to the hydrocarbon generating study of source rocks, such as the techniques of sample preparation, the relationship between the abundance and the content of fragment ions, and the necessity of the high resolution of TOF SIMS were discussed.
讨论了利用用飞行时间二次离子质谱仪 ( TOF- SIMS)研究烃源岩生烃性的制样技术、碎片离子的丰度和离子的浓度的关系 ;研究了吐哈盆地中侏罗统烃源岩中矿物沥青基质 TOF-SIMS的谱图分布特征、无机和有机碎片离子峰的归属与碎片离子的构成 ,提出了烃源岩成烃性评价方法 ,并利用碎片离子特征峰参数 XAL,YOX和 ZAR来反映矿物沥青基质中脂、氧和芳香结构的组成 ,结果表明 :它们作为矿物沥青基质的成烃性指标是有意义的 ;CH5NO3 + 等含氮氧化合物碎片离子特征峰的发现 ,反映了菌类等微生物积极参与生物降解作
3) MALDI-TOF/TOF tandem mass spectrometry
MALDI-TOF/TOF串联质谱
4) bilayer
[英][,bai'leiə] [美]['baɪ,leɚ]
双层
1.
This paper studied the procyanidins double-coated microencapsulating technology by double emulsion-spray drying, using soybean protein isolated, malt dextrin, sunflower seed oil, emulsifier et al.
本文研究以大豆分离蛋白、麦芽糊精与葵花籽油、乳化剂等作为双层壁材,采用双乳化-喷雾干燥法制备双层原花青素微胶囊。
2.
White light-emitting diode was obtained based on polymer bilayer structure of poly(N-vinlycarbazole)(PVK) and green light-emitting copolymer(PFSeH) of 9 9-dioctylfluorene(DOF) and selenophene(SeH).
通过聚乙烯咔唑(PVK)和发绿光的9’9-二辛基芴(DOF)与硒芬(SeH)的共聚物(PFSeH)形成聚合物双层器件结构(ITO/PEDOT/PVK/PFSeH/Ba/A l)实现白光发射。
3.
A numerical model for bilayer organic light-emitting diodes (OLEDs) is developed under the basis of trapped charge limited conduction.
在陷阱电荷限制电流传导理论的基础上 ,提出了双层有机电致发光器件的数值模型 ,研究了结构为“阳极 /空穴输运层 ( HTL) /发光层 ( EML) /阴极”的器件中电流密度和量子效率随有机层的特征陷阱能量、陷阱密度和载流子迁移率的依赖关系 。
5) double layer
双层
1.
Study of Double layer Inclinde-Tubes in a Settling Pond;
关于双层斜管沉淀池的探讨
2.
A type of double layer suspended spiral inductor was fabricated by the MEMS technology,and the performances of the inductor were measured at 0 05~10 GHz,and the effects of micro line width to Q-factor and the inductance were also studied.
利用MEMS工艺制作了一种双层悬空结构的圆形射频微电感,研究了双层结构微电感中微带线宽度对其性能的影响。
6) double-layer
双层
1.
Based on the structural features of a DV tape package and the characteristics of raw material,a set of hot-runner injection mould with double-layer and four-cavity in a layer was designed for forming the package.
基于塑件结构特点和原料特性,设计了生产DV带包装盒的1模8腔热流道双层注射模,为此类浅壳状塑件的生产提供了一种经济、高效的解决方案。
2.
The research status of electroless Ni–P composite plating on magnesium alloy was introduced, including the electroless double-layer composite plating, electroless multicomponent alloy composite plating and electroless powder composite plating.
介绍了镁合金化学复合镀技术的研究现状,包括双层化学复合镀、多元合金化学复合镀和粉体化学复合镀。
3.
The results indicate that the double-layer type Absorber may improve the Absorbing property of the CNTs composites at C1 band,which made of surface layer of CNTs coating,bottom layer of dielectric composites with low dielectric constant,high intrinsic impedance.
运用传输线理论分析两种直径碳管复合材料与不同材料组成双层涂层的反射率变化。
补充资料:Disflamoll tof
分子式:C24H51O4P
分子量:434.64
CAS号:78-42-2
性质:暂无
制备方法:暂无
用途:暂无
分子量:434.64
CAS号:78-42-2
性质:暂无
制备方法:暂无
用途:暂无
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条