说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 度量直径
1)  metric diameter
度量直径
2)  diameter measuring
直径测量
1.
Laser scanning system for diameter measuring of which scanning object lens are free;
无扫描物镜的激光扫描直径测量系统
2.
After smoothing fiber border,a new diameter measuring method based on the pixel numbers is.
以棉的纵向形态直径测量为例,提出在轮廓跟踪的同时判别纤维交叉和头端的算法;根据棉的纵向形态边缘经平滑后纤维轮廓光滑的特点,提出基于像素长度的纤维直径测量新方法。
3.
In this paper,a diameter measuring technique of slender glass tube based on CCD assembling is presented.
提出了一种基于CCD拼接技术的高精度直径测量方法。
3)  diameter measurement
直径测量
1.
Design and optimize the diameter measurement system of live ring;
回转窑轮带直径测量系统优化设计
2.
The diameter measurement accuracy of the rotating objects is not high enough at present, which can not meet the needs of the industry production.
针对目前回转体直径测量水平不能满足工业生产的现状,本文提出了一种基于激光多普勒效应的回转体直径测量系统,选用双光束外差检测法和计数式频率测量方法进行信号解调。
4)  equivalent diameter
当量直径
1.
From the study of relation between specimen' s shape and plastic indicator for isotropic material, the concept of equivalent diameter is introduced, and the quantitative relationship between plastic indicator and the ratio of gauge length to equivalent diameter is established.
首先针对各向同性A3钢,对试件形状对塑性指标的影响进行了研究,提出了当量直径(矩形试件宽度和厚度的函数)的概念,获得了塑性指标与当量直径、试件长度之间的定量关系,在形式上获得了与圆柱形试件类似的关系。
2.
The experimental data of pressure drop was used to calculate equivalent diameter d s by Ergun formula.
实验测定了一种新型的环柱形催化剂活性组分在其内、外表面上不均匀分布的乙烯基乙酸酯合成反应器的床层压降和该催化剂填充床的二维温度分布 ;以压降实验数据代入 Ergun公式计算了环柱形催化剂的当量直径 ds和填充床的传热参数 ,采用正交配置的方法对拟均相二维传热模型进行求解 ,得到床层的径向有效导热系数和壁给热系数。
3.
This paper studied the influence of irregular shape catalysts with through-holes on the pressure drop of the fixed bed and determined the equivalent diameter of irregular shape catalysts with through-holes.
本文具体研究异形多通孔催化剂对床层压力降的影响 ,并测定了异形多通孔颗粒的当量直径 。
5)  diameter of measuring bar
量棒直径
6)  forest diameter measuring
直径量测
补充资料:当量比表面直径、表面积体积平均直径
分子式:
CAS号:

性质:又称当量比表面直径、表面积体积平均直径。是颗粒群表面积分布的平均直径。其意义为与颗粒群的粒形相同,总体积相同、总表面积相同,且粒度均匀的一个假想颗粒群的粒度。亦即指与该颗粒群的粒形相同,比表面积相同的一个颗粒的粒度。 

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条