1) rotational response
转角反应
1.
A response curve fitting method is developed to estimate parameters of beam-type members with unknown rotational response.
该方法采用一组正交基函数对Euler-Bernoulli梁在不同时刻的平动反应曲线进行拟合,继而通过平动反应曲线对测点坐标的导数获得梁的转角反应曲线。
2) slope
转角
1.
There are many methods for computation of the slope and deflection of beams such as the integration method, the finite difference method, the Macaulay′s method, the Mohr′s ‘area-moment’ methed and so on.
由挠曲线连续性出发 ,从平面几何角度观察了欲求挠度和转角的关系 ,发现其可表示成谓之为比拟梁法的自由端挠度的函数。
2.
The paper discussed the change principle of high degree parabolic curvature and point out that the slope of point which curvature is largest have relation only to n-the degree of parabolic, while n→∞,the limited values are and 35.
本文讨论了高次抛物线曲率变化规律，指出了曲率取最大值的点处切线的斜率（转角）只与次数ｎ有关，且当ｎ→∞时，其极限为（３５。
3) angle
转角
1.
Analyzing plow chain's power with or without the effect of angle of the conveyor,studying three kinds of main resistances.
对刨链在有无转角(溜槽转角)影响下进行受力分析,研究三种主要阻力对刨链的影响。
2.
Researched AS-UII robot then gives a kind of method how to measure angle of robot indirectly.
以AS-UII机器人为研究对象,提出了一种间接测量机器人转角的方法。
3.
In order to control the clamping force scatter, we alsowant to use torque adding angle to replace the old design(torqueonly).
因此，本文提出采用扭矩加转角的控制法来取代原先扭矩控制法，并建立起一种有效、可行的螺纹联接扭矩设计及试验验证方法。
4) corner
转角
1.
3D finite elements method analysis on wharf structure and soil in the corner of No.2 croy of Tianjin Port;
天津港二突堤转角区域码头结构与土体三维有限元分析
2.
The corner of the bottom ball is one of the important parameters restricting the deep water.
计算分析表明 ,隔水管底部球铰处的转角是制约深水作业的重要参数 ,船体的漂移是影响它的最重要的因素 ;其次是隔水管顶部张力 ,随着顶部张力的增大 ,底部球铰的转角减小 ;随着海流速度的增大 ,底部球铰的转角增大 ;海浪的影响不明显。
3.
The corner acting as the node of elements,the researching of corner provides the new viewpoint to evaluate architecture,which establish the dialectic relationship between local and whole.
转角作为建筑要素的连接部位,对转角的研究在整体和局部间建立起辩证关系,提供了一个感知建筑形态的切入点,将观察者引入了事件。
5) rotation angle
转角
1.
It points out further that line-strain is the function of rotation angle,and proves the conclusion that small deformation hypothesis requires small deformation and small rotation angle.
如何描述变形体内过一点微段的线应变总是受到人们的关注,文章使用变形几何学分析了线应变的计算,指出线应变是转角的函数,证实小变形假定不仅要求变形小,而且要求转角小的结论。
2.
A measurement method based on image is present to measure rotation angle at high precision of 5″ which uses a line as the character sign.
针对科研与工程中转角测量优于5″的高精度要求,提出了一种用直线做特征标志的基于图像的测量方法。
6) rotation
转角
1.
A new finite element - rectangle plane-shell element with rotational degrees of freedom is given via the derivation of the stress matrix and stiffness matrix of the element.
本文讨论了一个新型的单元———带转角自由度的矩形平板壳体单元 ,推导了该单元的应力矩阵和刚度矩阵。
2.
Based on the theory and test, the elasto plastic rotation curvature relationship is discussed with regard to bond and slip, and formulas for calculating yield slip rotation and ultimate slip rotati.
本文在理论和试验研究的基础上，初步探讨了考虑型钢与混凝土之间粘结滑移的弹塑性转角—曲率关系，给出屈服滑移转角与极限滑移转角的计算公式，由此编制了有限元分析程序，并与试验结果相对照比较符合。
3.
The simplified calculation model of frame-shear wall structure is directly given by the definition of frame stiffness in resisting horizontal displacement and the definition of rotation stiffness for the coupling beam.
本文不采用连续化假定,由框架抗侧刚度和连系梁转角刚度的定义,直接给出总剪力墙的计算简图。
参考词条
补充资料：地球自转角速度
rotational angular velocity of the earth
地球自转角速度:
地球本体绕通过其质心的旋转轴自西向东旋转的角速度。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。