1) peripheral fatigue
外周疲劳
1.
The conception ,category,research history and actuality of physical fatigue are retrospect in this review possible mechanisms and relationship of peripheral fatigue and central fatigue are discussed too.
通过文献综述法简要总结了躯体性疲劳的概念、研究历史及现状,介绍了中枢疲劳和外周疲劳的可能机制,简要探讨了中枢疲劳和外周疲劳的关系。
2) low cycle fatigue
低周疲劳
1.
Study on fracture and intermediate temperature low cycle fatigue property of ladle shell material SM490B;
钢包材料SM490B钢断裂及中温低周疲劳性能研究
2.
Low Cycle Fatigue Behavior of ZL101 Aluminum Alloy;
ZL101铝合金低周疲劳行为研究
3.
Investigation of low cycle fatigue behavior of 16MnR steel at elevated temperature;
16MnR钢中温低周疲劳行为研究
3) low cyclic fatigue
低周疲劳
1.
The research on low cyclic fatigue behaviors was carried out at 400 ℃ for two kinds of Zr-alloys(1#, Zr-1Sn-0.
结果表明,2#合金的低周疲劳性能优于1#合金的低周疲劳性能。
2.
Fully reversed low cyclic fatigue (LCF)tests were conducted on [0 0 1], [0 1 2],[1 1 2], [0 1 1] and [11 4] oriented single crystals of nickel-based superalloy DD3 with different cyclic strain rates at 950℃.
在 ９５０℃ｔ对［０ ０１］、［０１２］、［１１２］、［０１１］和［１１４４］晶体取向的镍基单晶超合金 ＤＤ３试样进行了对称循环低周疲劳（ＩＣＦ）试验。
3.
Termal infrared imagery was u3ed to measure the surface temperature field of planar 40CrNiMoA steel specimens in low cyclic fatigue with thermal analysis provided.
通过红外热象仪对４０ＣｒＮｉＭｏＡ板试样在低周疲劳过程中的表面温度场测量及热分析计算；得到了试样表面热耗率的分布及其变化规律。
4) high cycle fatigue
高周疲劳
1.
High Cycle Fatigue Properties of AZ91D Die Cast Magnesium Alloy;
压铸镁合金AZ91D高周疲劳性能研究
2.
Effects of Nd on High Cycle Fatigue Properties of Die Cast Magnesium Alloy AZ91D;
Nd对压铸镁合金AZ91D高周疲劳性能的影响
3.
High temperature high cycle fatigue behavior of K40S cobalt-b ase superalloy;
K40S钴基高温合金高温高周疲劳行为
5) Low-cycle Fatigue
低周疲劳
1.
Low-cycle Fatigue Behavior of Die Cast Mg-7Al-0.5Y Magnesium Alloy;
压铸态Mg-7Al-0.5Y合金的低周疲劳行为
2.
The low-cycle fatigue tests of welded I-section bracing members;
焊接工字形截面钢支撑低周疲劳性能试验研究
3.
Prediction software of multiaxial low-cycle fatigue life;
多轴低周疲劳寿命预测软件
6) high-cycle fatigue
高周疲劳
1.
The measurement of the high-cycle fatigue damage variable and the study of the damage evolutional law;
高周疲劳损伤变量的测试和损伤演变规律的研究
2.
Comparative study of multiaxial high-cycle fatigue-prediction criteria;
多轴高周疲劳失效准则的对比分析
3.
SEM micrographs of the fatigue fracture surface indicate that process of high-cycle fatigue of composites may be divided into three stages,fatigue crack nucleation,fatigue crack propagation and final fracture.
结果表明,增强体的加入有效地提高了复合材料的屈服强度、弹性模量和疲劳性能,使复合材料高周疲劳极限提高到约250MPa(1×107循环周次)。
补充资料：雌激素的外周生成
雌激素的外周生成
绝经前，绝大部分的雄烯二酮在卵巢转化为雌激素，体内90%的雌二醇和50%的雌酮来自卵巢，而其余的雌激素由卵巢外其他组织将雄烯二酮转变成雌酮。雄烯二酮主要来自肾上腺，少部分来自卵巢。绝经后，卵巢中卵泡明显减少，使雌激素水平明显下降，总量仅相当于月经周期早卵泡期水平的一半，是晚卵泡期的1/10。这些雌激素来自于雄烯二酮在外周组织的转化，如脂肪等组织。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条