1) pattern genetics
型式遗传
2) genetic model
遗传模型
1.
Analysis on the genetic models for main characters in wheat;
小麦主要性状的遗传模型分析
2.
A genetic model was proposed for simultaneously analyzing genetic effects of nuclear,cytoplasm,and nu- clear-cytoplasmic interaction(NCI)as well as their genotype by environment(GE)interaction for quantitative traits of diploid plants.
提出了能分析二倍体植株数量性状核质互作效应的遗传模型,该模型把控制数量性状总的遗传效应分为核效应、质效应和核质互作效应,以及它们分别与环境作用的效应。
3.
Objective To explore the genetic model of systemic lupu s erythematosus(SLE).
结论 系统性红斑狼疮为加性遗传模型 ,基因频率为 0 。
3) type Ⅱ/genetics
型/遗传学
5) Inheritance model
遗传模型
1.
The near-isogenic lines of the rice cross Jing Diao 3(Japonica rice)× Towada(Indica rice) ,were need to studies the genetic the cold tolerance characters at the booting stage in their progeny family groups by utilizing the method of major gene plus polygene mixed inheritance model and joint analysis method of segregating plus non-segregating generations.
采用主基因+多基因混合遗传模型和分离世代加不分离世代联合分析的方法,对云南稻种粳掉3号与十和田构建的近等基因系(NILs)的衍生后代家系群体的孕穗期耐冷性状进行遗传研究。
2.
The method of major gene plus polygene mixed inheritance model was used to analyze the genetics of yield traits and fiber qualities in (Simian 3×TM1) and (Simian×CARMEN).
对(泗棉3号×TM 1)(组合Ⅰ)和(泗棉3号×CARMEN)(组合Ⅱ)的产量与品质性状进行遗传模型分析,得到有关产量与品质性状的最适遗传模型,其中组合Ⅰ子指的最适遗传模型为负向显性主基因+多基因模型,铃重最适遗传模型为等显性主基因+多基因混合遗传模型,衣分、单株铃数的最适遗传模型分别为两对主基因+多基因和一对主基因+多基因模型。
6) genetic pattern
遗传配型
1.
The genetic pattern analysis of transgenic Hu-IFN-α gene Ctenophatyngodon idellus gynogenetic F_1;
转Hu-IFN-α基因草鱼雌核发育F_1的遗传配型分析
补充资料:55°圆锥管螺纹型式和尺寸
螺纹代号 | 基本尺寸 英 寸 | 大径 mm d=D | 螺距 mm p | 每英寸牙数 tpi | 中径 mm d2=D2 | 小径 外螺纹 d3 | 牙型高度 H1 | 圆弧尺寸 r | 底孔尺寸 mm |
R 1/16 | 1/16" | 7.723 | 0.907 | 28 | 7.142 | 6.561 | 0.581 | 0.125 | 6.4 |
R 1/8 | 1/8" | 9.728 | 0.907 | 28 | 9.147 | 8.566 | 0.581 | 0.125 | 8.4 |
R 1/4 | 1/4" | 13.157 | 1.337 | 19 | 12.301 | 11.445 | 0.856 | 0.184 | 11.2 |
R 3/8 | 3/8" | 16.662 | 1.337 | 19 | 15.806 | 14.950 | 0.856 | 0.184 | 14.75 |
R 1/2 | 1/2" | 20.955 | 1.814 | 14 | 19.793 | 18.631 | 1.162 | 0.249 | 18.25 |
R 3/4 | 3/4" | 26.441 | 1.814 | 14 | 25.279 | 24.117 | 1.162 | 0.249 | 23.75 |
R 1 | 1" | 33.249 | 2.309 | 11 | 31.77 | 30.291 | 1.479 | 0.317 | 30 |
R 1 1/4 | 1 1/4" | 41.910 | 2.309 | 11 | 40.431 | 38.952 | 1.479 | 0.317 | 38.5 |
R 1 1/2 | 1 1/2" | 47.803 | 2.309 | 11 | 46.324 | 44.845 | 1.479 | 0.317 | 44.5 |
R 2 | 2" | 59.614 | 2.309 | 11 | 58.135 | 56.656 | 1.479 | 0.317 | 56 |
R 2 1/2 | 2 1/2" | 75.184 | 2.309 | 11 | 73.705 | 72.226 | 1.479 | 0.317 | 71 |
R 3 | 3" | 87.884 | 2.309 | 11 | 86.405 | 84.926 | 1.479 | 0.317 | 85.5 |
R 4 | 4" | 113.030 | 2.309 | 11 | 111.551 | 110.072 | 1.479 | 0.317 | 110.5 |
R 5 | 5" | 138.430 | 2.309 | 11 | 136.951 | 135.472 | 1.479 | 0.317 | 136 |
R 6 | 6" | 163.830 | 2.309 | 11 | 162.351 | 160.872 | 1.479 | 0.317 | 161.5 |
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条