1) delivery anatexis
递进深熔
2) multicycled diapiric increment melting
多旋回底辟递进熔融
3) penetration
[英][,penɪ'treɪʃn] [美]['pɛnə'treʃən]
熔深
1.
Detection of the penetration in keyhole-mode plasma arc welding;
穿孔等离子弧焊的熔深检测
2.
The Study of Penetration Control Technology Base on Scr CO_2 Welding Machine;
晶闸管CO_2焊机熔深控制技术的研究
4) weld penetration
熔深
1.
Mechanism of weld penetration increased by SiO_2 in AC A-TIG welding for aluminum alloy;
SiO_2增加铝合金交流A-TIG焊熔深的机理
2.
Effects of activating fluxes on DCSP A-TIG weld penetration of magnesium alloy;
活性剂对镁合金直流正接A-TIG焊熔深的影响
3.
The reason of influence of single elements on weld penetration was discussed.
以Ti粉、Si粉和Te粉作为活性剂,研究了单质对低碳钢直流正接A-TIG焊焊缝成形的影响,分析了单质影响熔深的机理。
5) welding penetration
熔深
1.
Effect of surface activating flux on welding penetration of aluminum alloy A-TIG welding with DCRP mode;
表面活性剂对铝合金直流反接AT-IG焊熔深的影响
2.
Effect of surface activating flux on welding penetration of A-TIG welding with DCSP mode of aluminum alloy;
表面活性剂对铝合金直流正接A-TIG焊熔深的影响
3.
A-TIG welding for titanium alloy was carried out to study effect of surface activating flux on welding penetration.
采用卤化物(CaF2,ZnF2,MnCl2)、氧化物(SiO2,TiO2,V2O5)和单质Te作为表面活性剂进行钛合金A-TIG焊,研究了表面活性剂对焊接熔深的影响规律。
6) weld penetration depth
熔深
1.
The experimental results show that, under the same parameter, the weld penetration depth in A - TIG welding with activating flux is greatly improved compared with the conventional TIG welding, while the weld penetration width is re-duced apparently.
试验结果表明;在相同的焊接工艺参数下,与普通TIG焊相比,涂活性化焊剂的A-TIG焊的焊缝熔深有显著增加,而熔宽明显减少;在涂敷的活性化焊剂成分和涂层厚度相同时,与普通TIG焊一样,A-TIG焊的焊缝熔深也是随焊接电流的增加或焊接速度的减少而增大的。
2.
The varied weld penetration depths of austenic stainless steel in A-TIG welding are studied.
采用活性化焊剂TIG焊接方法研究了奥氏体不锈钢焊缝熔深的变化。
3.
The appearance,non-destructive and impact tests of weld were conducted,in order to seek the relationship between outside welding groove angle and weld appearance quality,as well as weld penetration depth and mechanical properties.
在其他焊接条件不变的情况下,仅对外焊坡口角度变化进行焊接试验,并对焊缝进行外观、无损和冲击性能试验,以寻求外焊坡口角度与埋弧焊管焊缝外观质量、焊缝熔深和力学性能间的关系。
补充资料：熔盐电解法生产铌粉(见熔盐电解法生产钽粉)
熔盐电解法生产铌粉(见熔盐电解法生产钽粉)
production of niobium powder by molten salt electrolysis
rongyand+onjlefa ShengChan n.fen熔盐电解法生产妮粉(produetion。fn;obi-um powder by molten salt eleetrolysls)见熔盐电解法生产担粉。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条