1) co-Boolean simulation
协同布尔模拟
1.
By combining the new model with the probabilistic model, co-Boolean simulation was realized.
提出了一种新的改进型储层沉积相建模的河道模型 ,该模型扩展了对河流分汊、交汇等现象的描述和模拟 ,根据改进的河道模型的特点和河道的地质地理特征 ,利用一种新的河道模型条件化算法 ,并将河道模型与砂岩概率模型相结合 ,实现了协同布尔模拟。
2) co-simulation
协同模拟
1.
Hardware/Software Co-simulation Method for Multi-processor Embedded Systems;
多处理器嵌入式系统的软/硬件协同模拟验证方法
2.
The Design and Implementation of Synchronization and Communication Algorithm of Hardware/Software Co-Simulation;
软硬件协同模拟的通信同步算法设计与实现
3.
A hardware/software co-simulation method is presented which integrates an event-driven VHDL hardware simulator with an instruction set simulator (ISS).
提出一种在嵌入式系统软硬件协调设计中对系统功能进行验证的软硬件协同模拟方法 该方法使用指令集模拟器 (ISS)和事件驱动硬件模拟器分别完成软硬件的模拟 ,并采用C ++语言构造处理器的总线功能模型 ,实现软硬件模拟器的信息交互 重点讨论指令集模拟器、总线功能模型以及硬件模拟器协同模拟接口的设计与实现方法 ,同时还给出了软硬件模拟器之间的同步算
3) Boolean simulation
布尔模拟
1.
At the first stage, the Boolean simulation method is adopted to establish the model of interwell sandstone and shale distribution, and at the second stage, the simulated annealing method is applied to characterize the distribution of interwell reservoir parameters on the basis of the model.
提出用布尔模拟与模拟退火结合的两阶段模拟方法模拟井间储层参数分布。
4) cooperative simulator
协同模拟器
1.
The basic composition of the cooperative simulator and the USB system is briefly introduced in this paper.
简要介绍了协同模拟器和USB系统的基本组成,给出了协同模拟器中USB接口的硬件设计原理及USB软件实现方法。
5) distributed collaboration modeling
分布式协同建模
1.
A system structure of distributed collaboration modeling was designed and applied finally, and the n.
针对油田注水生产过程仿真分布式协同建模系统设计,分析了油田注水生产仿真技术和协同工作理论的发展与应用,讨论了客户/服务模式的特点和服务器端应用程序开发技术,以及协同系统的体系结构,提出了分布式协同建模系统的体系结构并给出了该系统的模型结构,最后给出设计实例,进而指出了未来协同工作的应用新领域。
2.
On the basis of distributed collaboration modeling technology based on distributed simulation model object, three-tier architecture based on CORBA is proposed, which consists of client layer, application server layer and database layer, to support distributed collaboration modeling.
在基于分布式仿真模型对象的分布式协同建模技术研究基础上,提出由客户机层、应用服务器层和数据库层构成的基于CORBA的三层体系结构实现技术,以支持分布式协同建模。
3.
As the modeling of mechatronic product simulation is completed often in manner of centralization, a new distributed collaboration modeling method was given.
针对目前复杂机电产品仿真通常只能集中建模的现状,提出一种新的分布式协同建模方法。
6) sequential coordinate modeling
序贯指示同位协同模拟
1.
A model of reservoir sedimentary micro-facies is established with S1 in Block Long10,eastern depression,Liaohe Oilfield,as an example,by using the probabilistic relationship between wave impedance and sedimentary micro-facies as well as parameters(width,thickness and volume) of the micro-facies in development performance,guiding by depositional model,and applying sequential coordinate modeling.
以辽河油区东部凹陷龙10断块沙一段为例,利用波阻抗与沉积微相之间的概率关系及开发动态中的各沉积微相参数(宽度、厚度、体积含量),以沉积模式为指导,应用序贯指示同位协同模拟方法,建立储层沉积微相相模型。
补充资料：格利布尔1500热模拟机
格利布尔1500热模拟机
格利布尔1500热模拟机
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条