1) Single point positioning floating
单点定位漂移
2) location drift
定位漂移
3) end phase shifting
端点相位漂移
4) Single-point Positioning
单点定位
1.
The Research of GPS Precise Single-point Positioning Base on Polynomial Fitting;
基于多项式拟合的GPS精密单点定位研究
2.
GPS single-point positioning is applied to the primary level horizontal control and RTK technique to density control points.
根据庐山各水库库容小、位置分散等特点,采用GPS单点定位进行首级平面控制和RTK技术加密控制点的方法,以GPS定位和测深技术为基础的三维数据自动采集系统,实现了对庐山各水库库容测量与计算。
5) single point positioning
单点定位
1.
Improved robust filtering based on residuals in real time single point positioning
在实时单点定位中基于残差信息的改进抗差滤波方法
2.
In this paper, the method of weighted GPS+GLONASS single point positioning based on posteriori estimation was proposed, which is more reasonable than weighting on the basis of experience.
提出了一种基于验后估计法定权的组合GPS/GLONASS单点定位方法。
3.
This paper briefly introduced the meaning of the technical development of single point positioning.
简要介绍单点定位技术发展的意义,探讨了单点定位的基本原理、处理方法、所涉及的误差改正以及数据处理中的一些关键技术,对现有基于广播星历的单点定位计算方法进行了精化,通过采用低通滤波技术,使之更具有实用性。
6) point positioning
单点定位
1.
Pseudo-range correction and kinematic point positioning accuracy;
GPS伪距改正及精密动态单点定位精度分析
2.
GPS broadcast ephemeris error and its effect on single point positioning accuracy;
GPS广播星历误差及对单点定位的影响
3.
Accuracy analysis on civilian P(Y) code pseudoranges and its application on point positioning;
民用P(Y)码伪距的精度分析及其在单点定位中的应用
补充资料:闭式单点、双点压力机
| |||||||
主要参数内容 | 国际先进 | 国内先进 | 国内一般 | 国内落后 | 评定方法及说明 | ||
(一)加工精度 | 参照GB10924-89、GB10933-89、JB5200-91 | ||||||
1、滑块下平面对工作台上平面的平行度(mm) | 30%精度储备 | 20%精度储备 | 达到规定值 | 大于规定值 | |||
0.02+0.10/100×滑块下平面的被测长度 | |||||||
2、滑块行程对工作台上平面的垂直度 | 30%精度储备 | 20%精度储备 | 达到规定值 | 大于规定值 | |||
0.05+0.02/100×滑块行程长度 | |||||||
(二)结构性能 | |||||||
1、离合器、制动器接通率,当滑块行程次数≤16次/分时为70%,≤25次/分时为60%,≤45次/分时为50% | 大于规定值10% | 大于规定值 | 达到规定值 | 达不到规定值 | |||
2、液压超负荷保险装置、微调装置、吨位指示器 | 全部具有 | 全部具有 | 部分具有 | 没有 | |||
(三)噪声dB(A) | |||||||
1、公称力≤400kN | ≤85 | ≤87 | ≤88 | >88 | |||
2、公称力>400kN | ≤87 | ≤88 | ≤90 | >90 |
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条