|
|
1) Huanghuachang section
黄花场剖面
1.
Integrated high-resolution bio-, litho-, sequence-stratigraphic and carbon isotopic geochemical studies suggest that the Huanghuachang section near Yichang, southern China meets the requirements a Global Stratotype Section and point (GSSP) for the base of the Middle Ordovician Series and the yet-to-be-named third stage of the Ordovician System (or lower stage of Middle Ordovician Series).
湖北宜昌黄花场剖面是我国奥陶系大湾阶的界线层型剖面,高精度生物地层以及岩石、层序地层和碳同位素地球化学的综合研究表明,该剖面完全符合关于建立全球下奥陶统-中奥陶统界线(即奥陶系第三个尚待正式命名的阶)界线层型剖面和点位(GSSP)的条件。
2) loess section
黄土剖面
1.
6m loess section of Weinan, Shanxi Province of China.
６ｍ黄土剖面做了２３５个样品有机碳（ＴＯＣ）、有机硫（ＴＯＳ）及岩石有机质快速评价仪（Ｒｏｃｋ－ｅｖａｌ）热解分析。
3) Loess profile
黄土剖面
1.
In this paper,an analysis on the chemical component data of the Luochuan loess profile using the logratio statistics(LS) method was conducted.
洛川黄土剖面中SiO2 和CaO之间的负相关关系是虚假的 。
2.
Eighty one samples were selected from the late Pleistocene Xifeng loess profile for determination of element abundances using instrumental neutron activation analysis,and for measurement of 10Be using the AMS method.
利用仪器中子活化分析方法（ＩＮＡＡ）对西峰晚更新世黄土剖面８１个样品进行了测定，获取了３０个元素高分辨深度变化曲线，并与￣１０Ｂｅ变化曲线进行了对比研究，表明了一些元素与￣１０Ｂｅ相类似，也具有与深海沉积物δ￣１８Ｏ变化相关的深度变化规律，因而可作为气候环境变迁标志。
3.
This paper focuses on the distribution features of the heavy metals in loess profiles of Linfen Basin in Shanxi Province,in order to discuss the factors controlling geochemical behaviors of heavy metals in loess soil.
山西临汾盆地2条黄土剖面重金属分布特征及其影响因素研究表明,Pb、Cu和Zn的垂向变化特征非常相似,而As、Cd和Hg在剖面中的分布特征与前三者不同。
4) yellow soil profile
黄壤剖面
1.
In this article the distribution of the different forms of Pb in yellow soil profiles in Chengdu economic zone agro-ecosystems from Sichuan was been described,and the factors controlling the different forms transport and transformation were also been discussed.
以四川省成都经济区农田生态系统黄壤剖面中不同形态Pb分布特征为例,探讨黄壤剖面中不同形态Pb的迁移转化影响因素及其生态危害性。
5) Huaxi profile
花溪剖面
6) spline profile
花键剖面
补充资料：关于solidworks 中的剖面线中的剖面线
solidworks的剖面线线型定义和autocad相同,它使用了autocad的剖面线定义方法,与autocad通用.因此,可以对剖面线进行定义. 方法:修改\SolidWorks\lang\chinese-simplified\sldwks.prn 用笔记本打开该文件,添加需要的线形.如 ;; Based on AutoCAD Ver.13.0s Hatch Pattern File ;;;; solidworks 区域剖面线定义文件 :: *金属, (Iron BrickStone), ANSI Iron, Brick, Stone masonry 45, 0,0, 0,.125 *塑料, (Lead Zinc Mg), ANSI Lead, Zinc, Magnesium, Sound/Heat/Elec Insulation 45, 0,0, 0,.125 135, 0,0, 0,.125 *玻璃,AR-GLASS@1.0 45,0,0,0,0.5, 0.5,-0.5 45,0,0.1414214, 0,0.5, 0.3,-0.7 45,0.1414214,0, 0,0.5, 0.3,-0.7 *软木, Cork material@1.0 0, 0,0, 0,.125 135, .0625,-.0625, 0,.35355339, .176776696,-.176776696 135, .09375,-.0625, 0,.35355339, .176776696,-.176776696 135, .125,-.0625, 0,.35355339, .176776696,-.176776696 *无, None 删除不需要的定义类型,可以大大提高solidworks 的启动速度
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条
|