说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 有限元方法和程序
1)  Method and program for finite element
有限元方法和程序
2)  FEM program
有限元程序
1.
The main program is elastoplastic nonlinear FEM program,and the pre processors and post processors are developed.
针对球形容器液压胀形工艺的特殊要求开发了专用的微机版计算机模拟系统 ,主程序采用弹塑性非线性有限元程序 ,专门开发了前后处理程序 。
2.
With the help of the international widely-used FEM program ANSYS, the paper adopts the Direct Strength Method (DSM) to calculate the local structure strength of a large semi- submergible deck barge (Zhongren 1602) whose carrying capacity is15000 tons with 4 super large caisson on it.
以一艘载重15 000 t的大型半潜式甲板驳船(重任1602)装载4个超大型沉箱为例,采用直接计算法,利用国际上相关成熟的有限元程序(Ansys),进行局部结构强度计算,并对计算结果进行了分析和评估,提出了操作和结构加强建议。
3.
With the help of the international widely-used FEM program ANSYS, the paper adopts the Direct Strength Method(DSM) to calculate the local structure strength of a large semi submergible deck barge (Zhongren 1602) whose carrying capacity is15OOO tons with 4 super large caisson on it.
本文以一艘载重15000吨的大型半潜式甲板驳船(“重任1602”)装载4个超大型沉箱为例,采用直接计算法,利用国际上相关成熟的有限元程序(Ansys),进行局部结构强度计算,并对计算结果进行了分析和评估,提出了操作和结构加强建议。
3)  finite element program
有限元程序
1.
Several problems in plane frame geometric non-linear finite element program;
平面杆系几何非线性有限元程序中的几个问题
2.
Temperature field of box pier is simulated with the finite element program ANSYS.
采用有限元程序ANSYS对箱墩温度场进行了数值模拟分析,其理论计算结果与实测值吻合较好,从而证明了用ANSYS模拟温度场的可行性。
3.
A finite element program was worked out to solve the static intensity calculation problem of composite s.
为了合理处理列车车体结构分析中典型的板梁偏心连接问题,分别基于罚单元法和La-grange乘子法构造了板梁组合结构模型,将组合结构中相关节点对之间通过偏心关系建立的约束方程引入到平衡方程中,解决了梁单元因偏心连接而对组合结构总体刚度矩阵的贡献问题,并编制了求解板梁组合结构静强度计算问题的有限元程序。
4)  finite element analysis
有限元程序
1.
Simulation of the tensioning process of a large post-tension construction member was conducted with finite element analysis program.
采用有限元程序对某大型后张法预应力构件的张拉过程进行了仿真模拟。
2.
This thesis is developed by elasto-plastic method to analyze typical shell plate by Finite Element Analysis(FEA), to compare with the results from linear elastic method.
本文通过引入弹塑性理论,利用有限元程序对三种典型板壳结构进行弹塑性分析,并与弹性分析的结果进行比较,引用新的强度评判的可接受准则,解决了桩基式导管架的典型板壳结构强度设计中的难点。
3.
Simulation of the tensioning process of a large post-tension construction member was conducted with finite element analysis program.
采用有限元程序对某大型后张法预应力构件的张拉过程进行了仿真模拟。
5)  finite element method/softwares JIGFEX
有限元法/程序系统
6)  finite element equations
有限元方程
1.
Solving finite element equations is a key step in the numerical simulation of sheet metal stamping.
在板料冲压成形的有限元数值模拟过程中,有限元方程的求解是有限元分析中的一个重要步骤。
2.
The conformability of finite element equations for symmetric and non-symmetric Biot抯 consolidation is discussed in this paper.
论述了对称与非对称的Biot固结有限元方程组间的一致性,发现Biot固结有限元方程组系数矩阵是否对称是与平衡方程中与孔隙水压力有关的项是否进行分部积分有关。
3.
Based on Biot theory of two-phase anisotropic media and Hamilton theory about dynamic problem, finite element equations of elastic wave propagation in two-phase anisotropic media are derived in this paper.
基于Biot双相各向异性介质理论和动态问题的哈密顿原理,推导出任意双相各向导性介质中弹性波传播的有限元方程,并给出双相各向异性介质中弹性波有限元方程的数值解法。
补充资料:面向对象的程序设计(见程序设计方法)


面向对象的程序设计(见程序设计方法)
object-oriented programming

  m一onx一ong dujx一ong de ehengx日$he]}面向对象的程序设计(objeet一oriented pro-gramming)见程序设计。
  
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条