1) fat-binding capacity
脂肪吸附
1.
Chitosan(CTS),N-hydroxy propyl three methyls ammonium chloride chitosan(HTACC)of cationic chitosan derivative,carhoxymethyl chitosan(CMCTS)of hydrophilic chitosan derivative and hydrophobe cetyl-chitosan(CTCTS) were used to interacte with peanut oil in vitro by using a model of digestive tract in order to investigate their fat-binding capacity(FBC).
以壳聚糖(CTS)及其衍生物为脂肪吸附剂,花生油为吸附对象,通过模拟人体消化系统做体外实验,考察了3种不同性质的壳聚糖衍生物的脂肪吸附容量,其中羟丙基三甲基壳聚糖季铵盐(HTACC)为强阳离子壳聚糖,羧甲基壳聚糖(CMCTS)为亲水性壳聚糖,十六烷基壳聚糖(CTCTS)为疏水性壳聚糖。
2) absorbed layer of fat
脂肪球吸附膜
1.
The partial coalescence of fat in whipped dairy emulsions and the effects of whipping conditions, oil type and absorbed layer of fat on partial coalescence are introduced in this paper.
综述了脂肪球在搅打乳状液中的部分聚结现象和搅打条件、脂肪种类、脂肪球吸附膜对部分聚结的影响。
3) liposuction
[英]['lɪpəʊsʌkʃn] [美]['laɪpo'sʌkʃən]
脂肪抽吸
1.
Clinical Analysis of Power Assisted Liposuction on 80 Cases;
聚能震波脂肪抽吸术80例临床分析
2.
Early diagnosis and treatment of fat embolism after liposuction;
脂肪抽吸术后脂肪栓塞的早期诊断与治疗
3.
Liposuction and fat-grafting injection for breast augmentation;
脂肪抽吸和脂肪颗粒注射隆胸术
4) fat absorption
脂肪吸收
5) Adsorbing resin
吸附树脂
1.
m-Suladimethoxypyrimidine production wastewater was treated by adsorption process with adsorbing resin made by authors.
利用自行制备的吸附树脂处理磺胺间二甲氧嘧啶生产过程中产生的有机废水。
2.
The results show that the adsorbing resin NDA 900 has an excellent performance of adsorption desorption.
研究结果表明 ,NDA 90 0吸附树脂对该废水具有良好的吸附—脱附处理效果。
6) Polymeric adsorbent
吸附树脂
1.
Polymeric adsorbents for the adsorption of proanthocyanidins were designed and synthesized.
根据原花青素含有疏水性的苯环和酚羟基的特点,设计合成了含有苯环和酰胺基的大孔二乙烯苯-异氰酸三烯丙基酯-丙烯腈(DTA)共聚物吸附树脂,DTA树脂通过疏水作用和氢键吸附原花青素。
2.
In this paper, the dephenolizing process for treatment of phenol-containing wastewater from flotation extraction using modified 8BV-polymeric adsorbent is study.
采用改性8BV型吸附树脂,对含酚废水作进一步脱酚研究,考察了有关工艺条件。
3.
A continuous resin adsorption-desorption process has been developed successfully based on studies of series ultrahigh-crosslinking polymeric adsorbents which have different polarity, big specific area, big adsorption capacity, good mechanical strength, dense nano-pore and pore diameter matching for the molecule diameter of substances adsorbed.
该项目在研制具有不同极性且比表面积高、吸附容量大、机械强度好、纳米孔密集,以及孔径与被吸附物质分子直径相匹配的系列超高交联吸附树脂的基础上,成功地开发出连续式树脂吸附-脱附工艺,实现了此类废水的有效治理,并成功的实现了工业化。
补充资料：特性吸附与半胶束吸附
特性吸附与半胶束吸附
specifical adsorption and hemi-micelle adsorption
texing xifu yu banJ旧oshu xifu特性吸附与半胶束吸附(speeifieal adsorp-tion and hemi一mieelle adsorption)矿物一水界面的吸附的两种形式。特性吸附是因矿物表面与溶液中某种组分(离子或分子)有特殊的亲和力而产生的吸附，也称特殊吸附。特性吸附不仅可以改变电位的数量而且还可以改变电位的符号。例如，刚玉(A12O3)在NaZSO‘或RSO;Na(烷基硫酸钠)溶液中，电动电位随溶液浓度的增大由正值逐渐减小，直至变为负值，说明刚玉对50矛一或RSO不离子有特殊的吸引力。半胶束吸附是水溶液中的表面活性剂在矿物表面产生的吸附，当吸附量达到一定值以后，由于烃基的缔合作用，表面活性剂的离子或分子在矿物表面上形成紧密的吸附层，这类似于溶液中形成的胶束结构，但所形成的“胶束”与溶液中形成的胶束不同，只有二维空间，故称这类吸附为半胶束吸附。矿物表面对胺类捕收剂的吸附，当胺的浓度较大时，常可以产生半胶束吸附。 (龚焕高)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条