1) continuous shear stress
连续剪切
1.
Laminaria japonica gametophytic cells were cultivated in a photobioreactor under continuous shear stress(0～1000r/min)in 60 hours and the following static cultivation within 23.
以不同搅拌速率(0~1000r/min)对海带(Laminaria japonica)配子体细胞施加短期(0~60h)连续剪切,卸载剪切力之后细胞静止恢复23。
2) continuous confined strip shearing
连续剪切变形
1.
The basal principle and characteristic of continuous confined strip shearing acting on planking is introduced.
介绍了板材连续剪切变形方法的基本原理及特点。
3) non-continuous shearing-zone
非连续剪切面
1.
In various kinds of side slope engineering,the destructive process of slope often results from the shearing process throughout discontinuous shear-zone,and the comprehensive shearing strength of the shearing-zone is related with the distribution status of non-continuous shearing-zone.
在各类边坡工程中,坡体的破坏失稳过程往往就是其内部非连续剪切面的剪切贯通过程,这类剪切面的综合抗剪强度与非连续剪切面的分布状态有关。
4) shear connection
剪切连接
1.
The key structural parameters include the deformation ductility of shear connectors as well as the degrees of shear connection provided at both the sagging and the hogging moment regions.
由于基本上认为剪切连接件是非刚性的,在高等有限元模型中采用弹簧单元可以将它们的非线性荷载-滑移性质考虑在内。
5) continuously cutting
连续切削
1.
By the compared experiment for the cutting performances, it can be seen that the performances of this composite material is better than which of the ceramic tool material SG4 for continuously cutting quenched steel, and its wear-resisting property is litter lower tha.
通过与陶瓷刀具材料LT5 5、SG4的切削性能进行对比试验 ,发现其连续切削淬硬钢的性能高于SG4,但耐磨性能比LT5 5稍低 ,是一种适合连续切削铸铁与淬硬钢、尤其适合断续切削淬硬钢的刀具材料。
2.
By the compared experiments for cutting performance,it can be seen the performance of this nanocomposite material is better than which of the ceramic tool material SG-4 for continuously cutting hardened carbon steel and hardened carbon tool steel.
通过与陶瓷刀具材料SG-4的切削性能对比试验,发现该材料连续切削淬硬钢和淬硬工具钢的性能优于SG-4,是一种适合连续切削淬硬工具钢,尤其适合断续切削淬硬钢的刀具材料。
6) serial sections
连续切片
1.
Reconstruction of digital human lumbar spinal cord based on serial sections;
冷冻连续切片重建数字人腰髓
2.
By taking advantage of the high resolution of electron microscopy, the ultrastructure of the NMJ was analyzed through serial sections.
利用透射电子显微镜的高分辨率对神经肌肉接头的超微结构进行连续切片观察和电镜图像的三维重建,准确、客观、形象地展示了轴突末梢的立体形态、空间位置和毗邻关系,为神经肌肉接头的发育研究提供了重要信息。
3.
The computer program for joining serial sections of material microstructure into stereo-picture have been studied and developed in this article.
通过设计计算机程序，将连续切片方法得到的系列材料微观组织结构的两维截面图形经过处理后将其立体图形显示在计算机屏幕上，就可以对不能直接看到的材料微观组织结构进行直接观察。
补充资料：连续和非连续孔径射电望远镜
射电望远镜因接收天体射电的天线孔径的构成方式不同，而有连续孔径和非连续孔径之分。连续孔径射电望远镜是射电望远镜的一种最简单的类型，其天线孔径为接收单元所布满，因而天线增益和分辨率全由天线孔径的实际尺寸和形状决定。这类望远镜天线孔径可以有各种形状，如通常的抛物面、球面、抛物柱面、抛物带形反射面等。某些由分立天线（如偶极子天线、裂缝波导等）组成的天线阵，当阵元间距不大于半波长时，由于电场强度方向图和连续面电流分布的场强方向图相似，也被认为是连续孔径射电望远镜。这种情况更常见于线孔径或米波、十米波段的偶极子阵。非连续孔径射电望远镜是天线结构只分布在孔径部分面积内的望远镜，通常由多个天线组成。栅式干涉仪、复合射电干涉仪、栅十字、 T形栅、圆阵、圆环以及综合孔径射电望远镜等都是。这种望远镜的分辨率由天线范围（设想的孔径）的外尺寸决定，而总的天线增益或灵敏度，则取决于全部天线单元面积的总和。图中a所示的连续孔径天线可认为由N个单元面积组成,经天线传至接收机的信号是各单元反射信号的迭加，连续孔径射电望远镜通过焦点处的馈源自动得到这种迭加。由于二单元A、B信号的迭加效果等效于处在A、B的相关干涉仪输出，非连续孔径射电望远镜正是基于这个原理，在省去孔径一部分的情况下,保留连续孔径各单元间的全部间距和取向，如图中b所示的"骨架式"射电望远镜，或者依观测需要对这些间距和取向进行有限的采样（各种干涉阵），甚至用不少于2的有限天线依次采样后进行处理；图中c是综合孔径望远镜。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条