1) frictional undershoot
动摩擦下调
2) sliding friction
滑动摩擦
1.
A spherical cavity expansion-sliding friction calculation model on penetration of pressed-in piles;
静压桩贯入地基的球孔扩张-滑动摩擦计算模式
2.
Experimental study on sliding friction between pile and soil;
桩-土滑动摩擦的试验研究
3.
Study on the thermal-structural couple field of sliding friction process based on ANSYS
基于ANSYS的滑动摩擦热结构耦合分析
3) friction braking
摩擦制动
1.
Developments of high speed train of the world and friction braking of the train were introduced.
介绍了世界高速列车的发展和列车的摩擦制动方式、踏面制动的不足之处和盘形制动的优点;论述了高速列车上常用摩擦制动材料和新型复合材料的研究现状及优缺点;并针对国内铁路发展情况,提出了发展摩擦制动材料的建议。
2.
A simulation test of friction braking for high speed train was conducted according to similarity rule.
根据相似准则在MM 10 0 0型摩擦磨损试验机上进行高速列车摩擦制动模拟试验 ,研究了SiC颗粒增强铝基复合材料和铜基粉末冶金闸片配对时的制动摩擦性能 ,探讨使用铝基复合材料制动盘的可能性。
4) Friction Drive
摩擦驱动
1.
According to the shock characteristics between composite ultrasonic linear vibrator and guide slide surface,this paper proposed an impulse analysis model for calculating the friction drive force and friction transfer efficiency of ultrasonic motor.
针对复合材料超声直线电机振动体与导轨表面间存在冲击作用的特点，提出一种冲量分析模型计算电机的摩擦驱动力和摩擦转换效率。
5) rolling friction
滚动摩擦
1.
The wear test under the same conditions,basd on rolling friction,has been used to evaluate wear resistance of ionitrided 32Cr2MoV and TiN coated by ION plating 32Cr2MoV prior to ionitriding, and then the wear mechanics were analysed.
对离子氮化后的32Cr2MoV钢进行离子镀TiN处理,并将其与离子氮化的32Cr2MoV试样在相同的条件下进行了滚动摩擦试验,比较了二者的磨损试验情况并分析了磨损机理。
2.
A new idea for design of rolling friction artificial joint without UHMWPE based on the mechanics of rolling friction is put forward for alleviating this problem.
针对人工关节磨损颗粒导致的骨吸收、骨溶解现象以及由此引起的假体远期松动问题,基于滚动摩擦原理,提出了一种新的无聚乙烯滚动式人工关节设计思想,并以滚动式人工髋关节和滚动式人工膝关节设计为例探讨其基本设计原理。
3.
It provides the testing program of planar bearing rolling friction.
给出了平面轴承滚动摩擦试验方案。
6) dynamic friction
动态摩擦
1.
In order to deal with the nonlinear friction existed in the flywheel battery,a state function based on Lugre dynamic friction model of flywheel battery was established.
针对飞轮电池中非线性摩擦的特点,建立了基于Lugre动态摩擦模型的飞轮电池系统状态方程。
2.
Two dimensional dynamic friction contact of journal bearing has been studied, the effect of external load and friction coefficient on the non symmetry of contact pressure distribution is also discussed.
应用边界单元法研究了滑动轴承动态摩擦时的接触力学性质,揭示了接触压力分布的不对称性;讨论了载荷、摩擦系数等因素对不对称性的影响。
3.
The influence of the material types on the dynamic friction was studied by the technique of acoustic emission.
利用声发射技术研究了材料类别对动态摩擦状态的影响。
补充资料：动摩擦
分子式：
CAS号：
性质： 一物体沿着另一物体的表面运动时，在其接触面所产生的阻力。根据固体与固体的运动状态有滑动摩擦与滚动摩擦之分。
CAS号：
性质： 一物体沿着另一物体的表面运动时，在其接触面所产生的阻力。根据固体与固体的运动状态有滑动摩擦与滚动摩擦之分。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条