1) total reduction
总压下率
1.
It has been found that main factors effecting on the forming property are the total reduction of cold rolling and the annealing temperature.
研究了冷轧工艺参数对1Cr13不锈钢薄板基本成型指标的影响,找出了影响其指标的重要因素:冷轧总压下率、退火温度。
2) total reduction amount
总压下量
3) total compression rate
总压缩率
1.
The method can reduce the total compression rate of the finished products and raise intensity and tenacity of it.
采用加大半成品的总压缩率的方法,可以提高半成品热处理后的强度,从而可以减小成品拉拔的总压缩率,这样,有利于保证成品的强度和韧性。
4) reduction
[英][rɪ'dʌkʃn] [美][rɪ'dʌkʃən]
压下率
1.
The effect of cold rolling reduction on properties of deep stamping cold rolled sheet;
压下率对冷轧深冲板性能的影响
2.
The effect of technology data for different reduction,different rolling temperature and annealing temperature on ferrite-region hot rolling of IF steel was researched under the condition of lubrication.
采用润滑轧制,在不同压下率、终轧温度及退火制度下,研究了IF钢铁素体区热轧时,不同工艺参数对IF钢深冲性能的影响。
3.
In this paper,we investigated the reduction of four layer symmetrical clad sheet rolling.
对四层对称轧制复合时的压下率变化规律进行了研究，发现四层对称轧制复合时，同一次复合的两块复合板的压下率并不完全相等（ε１≠ε２），四层复合的总压下率εΣ介于两块复合板的压下率ε１与ε２之间，并且总压下率εΣ等于两块复合板的平均压下率。
5) reduction gradient
压下率
1.
Soft reduction gradient for continuous casting slab with different size;
厚度和宽度对连铸板坯轻压下率的影响
2.
Based on the analysis of continuous casting slab soft reduction process,a theoretical model to solve soft reduction gradient was deduced,and the effect of casting speed on reduction gradient was investigated.
通过对连铸板坯的轻压下过程分析,导出了求解铸坯压下率的理论模型,并考察了不同拉速下板坯压下率的变化规律。
3.
Based on the theoretical model of soft reduction gradient,the soft reduction gradients for continuous casting slabs with different steel grades were investigated.
结合压下率理论模型,考察了4个钢种连铸板坯轻压下率的变化规律。
6) reduction rate
压下率
1.
The effect of cold rolling reduction rate on magnetic properties and texture of thin non-oriented electrical steel sheets were researched.
研究了二次冷轧压下率对无取向硅钢薄带磁性能和织构的影响,结果表明:采用二次冷轧工艺时,55%左右的二次冷轧压下率能够获得磁性能优良的0。
2.
In the present work,based on the analysis of continuous casting slab soft reduction process,a theoretical model to solve soft reduction rate was deduced,and the effect of casting speed on reduction rate was investigated.
通过对连铸板坯的轻压下过程分析,导出了求解铸坯压下率的理论模型,并考察了不同拉速下板坯压下率的变化规律。
补充资料：北京有色金属研究总院生产的高精度旋压制品
北京有色金属研究总院生产的高精度旋压制品
北京有色金属研究总院生产的高精度旋压制品
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条