1) duralumin alloy 2A12
硬铝合金2A12
1.
The creep-damage parameters,localization of damage and the damage degree were obtained through the uniaxial tension creep test with duralumin alloy 2A12 in the condition of constant temperature(210℃) and different loads.
在210℃、不同载荷下对硬铝合金2A12板状试样进行了单轴拉伸蠕变实验,得到了硬铝的蠕变损伤参数以及断裂时的部位和损伤度。
2) Hard aluminum alloy 2A12
硬质铝合金2A12
3) 2A12 alloy
2A12铝合金
1.
The 2A12 alloy material was suffered from equal channel angular pressing(ECAP) in this experiment,using an ECAP die with the inner angle =90° and outer angle ψ=30°.
本文采用自行制造的内角为90°、外角为30°模具对工业用2A12铝合金材料进行了ECAP实验,并采用H itach iS-800透射电镜(TEM)观察和分析了挤压前后材料的微观结构。
4) 2A12 Aluminum Alloy
2A12铝合金
1.
Application of thermo-mechanical treatment process on 2A12 aluminum alloy in craft of rotary extrusion;
2A12铝合金形变热处理工艺在旋压工艺中的应用
2.
Microstructure of Ultrafine-grained 2A12 Aluminum Alloy Pressed by Equal-channel Angular Pressing;
等径角挤压2A12铝合金超细晶组织结构研究
3.
Study on the pore of vacuum electron beam welding 2A12 aluminum alloy;
2A12铝合金真空电子束焊接气孔缺陷分析
5) 2A12 aluminium alloy
2A12铝合金
1.
Study on near-net-shape forming process of thin-wall shell body made for 2A12 aluminium alloy
2A12铝合金薄壁壳体的近净成形加工技术研究
2.
The effects of different deforming temperature on the superplasticity of 2A12 aluminium alloywere experimented and discussed.
试验并讨论了不同变形温度对2A12铝合金超塑性的影响。
3.
Put forward the near-net-sharp forming process of warm extrusion and warm stamping to manufacture the precision forgings for the thin-wall shell bodies made of 2A12 aluminium alloy.
介绍了异型薄壁2A12铝合金壳体的温挤压制坯和温冲压成形相结合的近净成形加工工艺,并对成形加工方法的选择、成形加工工艺方案的确定、原始坯料的尺寸、坯料的加热温度规范、润滑剂及模具的润滑方式以及模具结构等一系列关键技术问题提出了具体的解决方法。
6) 2A12aluminium alloy pipes
2A12铝合金管
补充资料：氟碳涂层铝合金装饰板制成的铝合金幕墙建筑物
氟碳涂层铝合金装饰板制成的铝合金幕墙建筑物
J氟碳涂层铝合金装饰板制成的铝合金幕墙建筑物
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条