1) Liquid photosensitive resist etching ink
液态感光抗蚀油墨
2) liquid photo imageable etching resist ink
液态光致抗蚀油墨
1.
With the development of Printed Circuit Board (PCB),liquid photo imageable etching resist ink has become the prime process technology of the fine line graph facture.
随着印制电路板 (PCB)行业的飞速发展 ,液态光致抗蚀油墨已逐渐成为精细导线图形制作的主要方法。
2.
With the development of Printed Circuit Board (PCB),liquid photo imageable etching resist ink had become the prime process technology of the fine line graph facture.
随着印制电路板 (PCB)行业的飞速发展 ,液态光致抗蚀油墨已逐渐成为精细导线图形制作的主要方法 。
3) liquid UV photo-imageable ink
液态感光成像油墨
4) photoresist
[,fəutəuri'zist]
液态光致抗蚀剂
1.
The phototsensitive properties of photoresist with the dierrent hydrogen donors and photoinitiator dosage were studied by real time IR.
通过实时红外光谱研究了供氢体种类、复合引发剂用量对光致抗蚀剂感光性能的影响,并用该复合引发体系替代传统的907/ITX光引发体系制备线路板用液态光致抗蚀剂中,研究结果表明BCIM、EMK、NPG复合光引发体系效果比传统907/ITX光引发体系有提高,所得线路板成像边缘更光滑。
5) etch resist jet ink
抗蚀刻喷墨油墨
1.
One was directly jetting the etch resist jet ink on the special location forming the circuit pattern, then the PCB product was manufactured by etching and striping.
利用喷墨技术制造PCB的方法有两种,一是利用将抗蚀刻喷墨油墨直接喷在覆铜板的特殊位置上形成电路图形,再进行刻蚀、去膜得到PCB成品;另一种是将导电喷墨油墨直接喷在基板上形成导电图形。
6) photo-imageable ink
感光成像油墨
1.
Preparation and application of liquid photo-imageable ink for build-up multilayer board;
积层线路板用液态感光成像油墨的应用研究
2.
The reasons of underdevelopment and overdevelopment in processes of application in liquid photo-imageable ink was investigated and solutions were proposed.
研究了马来酸酐改性邻甲酚醛环氧丙烯酸酯的动力学,并确定了动力学方程,分析了液态感光成像油墨在应用中出现低显和过显问题的原因,并提出了解决办法。
补充资料：X射线抗蚀剂
分子式：
CAS号：
性质：采用软X射线（波长0.4～5nm）作为曝光源的抗蚀剂。由于X射线波长较紫外波长短两个数量级，几乎没有衍射的干扰，而且因其能量比电子束小得多，可以获得高分辨率，X射线对尘埃的透过性好，曝光工艺的缺陷率就低。所有的电子束抗蚀剂均可作X射线抗蚀剂。
CAS号：
性质：采用软X射线（波长0.4～5nm）作为曝光源的抗蚀剂。由于X射线波长较紫外波长短两个数量级，几乎没有衍射的干扰，而且因其能量比电子束小得多，可以获得高分辨率，X射线对尘埃的透过性好，曝光工艺的缺陷率就低。所有的电子束抗蚀剂均可作X射线抗蚀剂。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条