1) dual sensitive layer
双敏感膜
1.
This paper introduce the structure and fabrication for HSGFET ozone sensors with dual sensitive layer.
本文介绍了双敏感膜、复合悬浮栅 ( Hybrid Suspended Gate即 HSG) FET型臭氧传感器的结构与制作 。
2.
This paper studies hybrid suspended gate FET(HSGFET)ozone sensor with dual sensitive layer for detecting ozone in ppb range at room temperature.
本文研究室温下工作 ,具有双敏感膜 ,检测ppb范围内O3 浓度的复合悬浮栅FET(HybridSuspendedGateFieldEffectTransistor即HSGFET)型臭氧传感器 。
2) sensitive membrane
敏感膜
1.
Using silicotungstic acid and phosphomolybdic acid as active material, a medical sensitive membrane is made by applying chitosan as membranous material instead of traditional PVC.
以硅钨酸、磷钼酸为电活性物质,用壳聚糖代替传统的聚氯乙烯(PCV)作为成膜物质,制成药物敏感膜。
2.
Some molecular probes were added into the polymer and plasticizer which as a sensitive membrane used in fiber optic chemical sensor that can be measure some organic and inorganic compounds based on fluorescence quenching.
将芘、芘丁酸、对硝基苯芘丁酸酯、罗丹明123和乙二胺基萘磺酸钠等分子探针分别加入适当的固相支持剂和增塑稳定剂,制成五种敏感膜。
3.
For the special characteristics,kinds of polymers are applied to pH-ISFET,mainly in four aspects,served as pH sensitive membrane,pH passive membrane,structural materials and encapsulating material.
聚合物具有许多无机物没有的特性,已被越来越多地应用到pH-ISFET中,主要体现在4个方面,即pH敏感膜、pH钝化膜、结构材料及封装材料。
3) sensing film
敏感膜
1.
The design of high Q and low insertion loss(IL)SAW oscillator,research of chemical sensing film and process of film are detailed expatiated.
详细阐述了高Q低插损SAW振荡电路的设计、敏感膜材料和成膜技术的研究进展,指出了SAW化学战剂传感器发展的趋势。
2.
Based on the coupled-mode theory,the complex characteristic equation of long-period fiber gratings coated with metal film and sensing film is set up.
采用严格的耦合模理论,建立了镀金属膜和敏感膜的两层膜系长周期光纤光栅复特征方程,用微扰法对复数超越特征方程进行求解,结果和文献[5]给出的数据相符。
4) sensitive film
敏感膜
1.
NO gas sensitive effect of long period fiber grating coated with sensitive film;
镀有敏感膜的长周期光纤光栅NO气体传感特性
2.
The Rclations between output characteristics of silicon nitride sensitive film pH-ISFET andhydrolysis layer are measured.
水化层增长速率较高的敏感膜具有较大的时漂速率；时漂速率为一常数，与浸泡溶液无关。
3.
The progresses of SAW gas sensors are described on the structure of the surface acoustic wave and the sensitive films.
主要从声表面波(SAW)结构和敏感膜的角度综述了SAW气体传感器的研究现状。
5) sensitive layer
敏感膜
1.
On the basis of introducing the application and working principle of the sensor based on ISFET(ion sensitive field effect transistor),the development status of ISFET-sensor is reviewed, which included the sensitive layer, manufacture methods, compatibility with CMOS, integrated read out circuits, multi-sensor integration, etc.
在介绍离子敏场效应晶体管(ISFET)传感器的应用和基本工作原理的基础上,阐述了集成化ISFET传感器的研究现状,包括ISFET敏感膜及其制造工艺与CMOS兼容性研究、集成化读出电路、多传感器集成等方面。
6) oxygen-sensitive membrane
氧敏感膜
1.
A new kind of organically modified oxygen-sensitive membrane based on fluorescence quenching was prepared by sol-gel method,using dimthyldimethoxysilane(DDS) and tetraethoxysilane(TEOS) as the mixed precursor, Ru(phen)_3Cl_2 as the indicator.
以四乙氧基硅烷(TEOS)和二甲基二乙氧基硅烷(DDS)为共聚前驱体,Ru(phen)3Cl2为荧光指示剂,采用溶胶凝胶技术,通过改变DDS/TEOS比值,制备了基于荧光猝灭原理的有机改性氧敏感膜。
2.
two new types of oxygen-sensitive membrane were developed.
本文利用分子氧对二氯化-三-联吡啶钌的荧光有猝灭作用的特点,通过研究共聚前躯体或载体的种类和氧敏感膜制备的条件,研制了两种新型的氧敏感膜,建立了流动注射分析法测定有机溶剂中溶解氧的新方法。
补充资料：2,2-双氯甲基-三亚甲基-双[双(2-氯乙基)磷酸脂]
CAS：38051-10-4
分子式：C13H24Cl6O8P2
中文名称：2,2-双氯甲基-三亚甲基-双[双(2-氯乙基)磷酸脂]
英文名称：2,2- bis(chloromethyl)-trimethylene bis[bis(2-chloroethyl)phosphate]
phosphoric acid, 2,2-bis(chloromethyl)-1,3-propanediyl tetrakis(2-chloroethyl)
2,2-bis(chloromethyl)trimethylene bis(bis(2-chloroethyl)phosphate)
2,2-bis(chloromethyl)-1,3-propanediyltetrakis(2-chloroethyl)phosphate
分子式：C13H24Cl6O8P2
中文名称：2,2-双氯甲基-三亚甲基-双[双(2-氯乙基)磷酸脂]
英文名称：2,2- bis(chloromethyl)-trimethylene bis[bis(2-chloroethyl)phosphate]
phosphoric acid, 2,2-bis(chloromethyl)-1,3-propanediyl tetrakis(2-chloroethyl)
2,2-bis(chloromethyl)trimethylene bis(bis(2-chloroethyl)phosphate)
2,2-bis(chloromethyl)-1,3-propanediyltetrakis(2-chloroethyl)phosphate
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条