1) concave corner
凹槽拐角
1.
In order to improve the performance and reliability of grooved gate MOSFET s the effects of concave corner on characteristics of deep submicron grooved gate PMOSFET s are studied using device simulator MEDICI.
为优化槽栅器件结构 ,提高槽栅 MOSFET的性能和可靠性 ,文中用器件仿真软件对凹槽拐角对深亚微米槽栅 PMOSFET的特性影响进行了研究。
2.
The simulated structure parameters include negative junction depth,concave corner and channel effective length.
基于流体动力学能量输运模型和幸运热载流子模型 ,用二维器件仿真软件Medici对深亚微米槽栅NMOSFET的结构参数 ,如沟道长度、槽栅凹槽拐角角度、漏源结深等 ,对器件抗热载流子特性的影响进行了模拟分析 ,并与常规平面器件的相应特性进行了比较 。
2) corner
[英]['kɔ:nə(r)] [美]['kɔrnɚ]
拐角
1.
On the basis of residual areas after rough machining,a tool path generation algorithm for residual material fine machining at the corners of pocket boundary was developed and implemented in consideration of even radial cutting depth and smooth tool path.
在识别粗加工余料区域的基础上,从均匀径向切削深度、平滑刀轨路径等方面考虑,研究并实现了型腔边界拐角处的精加工刀轨生成算法。
2.
Sharp turning corners of the tool path are rounded, and the transition from a tool path track to the neighboring one is fulfiled through smooth curves.
在常规的环切刀轨生成算法基础上 ,设计了型腔高速铣削加工刀轨生成算法 对刀轨的拐角进行了平滑处理 ,实现了相邻刀轨环之间的光滑曲线过渡 ,避免了刀具运动方向的急剧变化 ,可使切削性能得到改
3.
General linear and nonlinear smoothing in an intensity image can blur corners seriously, so it s difficult to detect corners by a multi scale approach.
对灰度图进行一般线性和非线性平滑会极大程度地模糊拐角 ,使得多尺度方法难以用于拐角检测 。
3) corner
[英]['kɔ:nə(r)] [美]['kɔrnɚ]
拐角，角落
4) groove
[英][ɡru:v] [美][gruv]
凹槽
1.
The Fast Multipole Method for Electromagnetic Scattering of a Groove in a Perfectly Conducting Plane;
无限大导体平面上凹槽散射的快速多极子分析
2.
Fast Calculation of Wide Angle Scattering Fields of a Groove in a Perfectly Conducting Plane Based on Asymptotic Waveform Evaluation Technique;
渐近波形估计应用于无限大导体平面上凹槽散射场宽角度方向性函数的快速获取
3.
BST thick films are fabricated in the grooved silicon substrate by tape casting method.
采用流延法在有凹槽的硅片上制备出钛酸锶钡((Ba,Sr)TiO3)厚膜材料。
5) cavity
[英]['kævəti] [美]['kævətɪ]
凹槽
1.
Numerical study of supersonic turbulence flows on 2-D cavity;
二维凹槽超声速湍流流动数值模拟
2.
Study on cavity flow characteristics of supersonic combustor;
超音速燃烧室凹槽流动特性研究
3.
The large eddy simulation of supersonic cavity flow field
超声速凹槽大涡数值模拟研究
6) notch groove
凹槽
1.
Experimental study on permeability of fresh-old concrete bonding interface with notch groove;
带凹槽的新老混凝土粘结面渗透性能试验研究
2.
Based on the bonding mechanism and permeability of repair interfacial layer between new and old concrete,an idea to significantly increase bonding impermeability by means of chipping notch groove on the old concrete was proposed.
通过带凹槽的老混凝土粘结面与新混凝土粘结的复合圆台柱体试件的渗透性能对比试验研究,分析了凹槽宽度、粗糙度、界面剂等对粘结面渗透性能的影响。
补充资料：凹模壁厚及凹模垫板尺寸
型腔壁部投影面积 壁 厚， 毫 米
F， 厘米2 h1 h2 h3 h4 h5
<5 15~20 30~40 <=10 15~20 30~40
>5~10 20~25 40~50 10~15 20~25 40~55
>10~50 20~30 50~60 15~20 20~30 55~65
>50~100 30~35 60~75 20~25 30~40 65~70
>100~200 35~40 75~85 25~30 40~50 70~75
>200 >40 >85 30~35 50~60 >80
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条