1) sheet metal
板金
1.
Theoretic research on the springback of sheet metal bending;
板金弯曲成形回弹问题的理论研究
2.
Sheet metal forming is widely used in the manufacturing of automobile, locomotive,airplane and meters.
板金成形在汽车、机车车辆、飞机、仪表等制造业中,有着广泛的应用。
2) sheet metal
金属薄板,板金
3) aluminum alloy sheet
铝合金板
1.
Parameter prediction of bending of aluminum alloy sheet induced by laser prompt heating;
铝合金板快速加热弯曲的参数预测
2.
Tribotest at drawbead in aluminum alloy sheet warm forming;
铝合金板温成形过程中拉深筋处摩擦的测量
3.
Finite element analysis on mechanical behavior of adhesive joint of steel sheet and aluminum alloy sheet;
钢板与铝合金板胶接接头力学性能的有限元分析
4) sheet metal
金属板料
1.
Experimental research on cladding technique of NC incremental forming for sheet metal;
金属板料数控增量成形的覆层技术实验研究
2.
Study on calculation of minimum laser energy of sheet metal deformation by laser shock forming;
激光冲击金属板料变形的最小激光能量估算及其实验研究
3.
Simulation and Analysis of laser shock forming process of sheet metal;
金属板料激光冲击成形数值模拟及工艺分析
5) aluminum alloy plate
铝合金板
1.
Center-cracked aluminum alloy plates were adhesively one-side bonded with unidirectional carbon/ epoxy composite patches by vacuum-bagging process.
利用袋压工艺、采用单向碳纤维/环氧复合材料补片对含中心裂纹的铝合金板进行了修补,测试了胶接修补前后板的静态力学性能和疲劳性能。
2.
The aluminum alloy plate for adhesive bonding was anodized in the solution of phosphoric acid and its adhesion performance was studied.
采用磷酸电解质对铝合金板进行了阳极化处理并测试了其胶接性能,测试了阳极化过程中铝合金板的基本力学性能,观察了阳极化处理后的铝合金板的表面形貌,分析了阳极化处理后铝合金粘接副的胶接界面、拉伸剪切失效模式。
3.
ANSYS finite element analysis method was adopted to analyze the rigidity of a center holed aluminum alloy plate, and to investigate the influence of hole on rigidity and stress area disturbed.
用ANASY有限元分析软件对复合材料修复铝合金结构的刚度进行数值分析,研究了开孔损伤对铝合金板结构刚度和应力扰动区范围的影响。
6) aluminium alloy sheet
铝合金板
1.
Research and development of friction and lubrication for aluminium alloy sheet forming;
铝合金板成形中摩擦与润滑的研究进展
2.
Formability window of aluminium alloy sheet at variable blank-holder force;
变压边力条件下铝合金板的成形窗口
3.
In order to exactly evaluate drawability of automotive aluminum alloy sheets, the correlation between material properties and formability of automotive aluminium alloy sheets, based on the sample data obtained from uniaxial tension, plane strain tension and cylindrical deep drawing tests, is analyzed by means of regression analysis method.
为了准确地评估汽车用铝合金板的拉深性能,在单向拉伸试验、平面应变拉伸试验和圆筒件拉深试验获得的样本基础上,采用回归分析方法,全面地分析了汽车用铝合金板各种材料性能参数与其拉深性能之间的对应关系。
补充资料：金菊对芙蓉 九月二十五日寿金 金氏园有
【诗文】：
寿宿腾光，寿香袅碧，郁葱枝上梧桐。记＊麟令旦，门挂弧蓬。今年东阁郎皆侍，怀章绶、拜捧金钟。荣华富贵，眼前谁似，堪展眉峰。秋高景物俱浓。正阶前金菊，巧对芙蓉。爱菊名寿客，寿与公同。醉蓉初莹凝脂面，酣天酒、芳脸潮红。何妨判饮，与花双醉，醉似花容。
【注释】：
【出处】：
寿宿腾光，寿香袅碧，郁葱枝上梧桐。记＊麟令旦，门挂弧蓬。今年东阁郎皆侍，怀章绶、拜捧金钟。荣华富贵，眼前谁似，堪展眉峰。秋高景物俱浓。正阶前金菊，巧对芙蓉。爱菊名寿客，寿与公同。醉蓉初莹凝脂面，酣天酒、芳脸潮红。何妨判饮，与花双醉，醉似花容。
【注释】：
【出处】：
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条