1) Complex baseband
复基带
2) composite substrate
复合基带
1.
In this work,the micro-orientation of the Ni5W surface layer on a NiW composite substrate that was processed by heavy cold miring and re.
采用 EBSD 技术对大冷轧变形量、再结晶退火后的 Ni-W 复合基带的表面织构进行了表征,对其晶粒取向信息、晶界特征等信息进行采集和分析。
2.
In this work,the micro-orientation of both the Ni5W surface layer and cross section ofa NiW composite substrate that was processed by heavy cold rolling and recrystallization annealing,was analyzed by EBSD technique.
采用该技术,对大冷轧变形量、再结晶退火后的 Ni-W 复合基带的表面和截面微取向进行了表征,对其晶粒取向、晶界特征等信息进行采集和分析。
3.
The ingot was cold rolled and annealed to obtain Ni5W/Ni12W/Ni5W composite substrate based on the process of rolling .
在本文中,我们采用先进的放电等离子技术 (SPS)制备出中间层为高强度的Ni-12％(原子分数) W合金,外层是Ni-5％(原子分数)W合金的三层复合铸锭,然后用压延辅助双轴织构基底技术 (RABiTSTM)通过冷轧和再结晶退火获得了 Ni5W/Ni12W/Ni5W复合基带。
3) ECBN
等效复基带
4) baseband combiner
基带复合器
5) Ag based superconducting composite tape
Ag基超导复合带
6) composite foundation with sparse T-shaped rigid piles
带帽刚性疏桩复合地基
1.
In-situ full-scale tests on stress characteristics of composite foundation with sparse T-shaped rigid piles were carried out under the condition of experimental section of Shanghai—Nanjing Expressway widening project.
依托沪宁高速公路(上海段)拓宽工程试验段,进行拓宽路堤下带帽刚性疏桩复合地基应力特性的现场足尺试验;根据试验数据分析桩–土应力水平和分布特征,并采用不同模式进行桩–土应力比的计算、比较和分析。
补充资料：板带轧制速度规程(见板带轧制规程设计)
板带轧制速度规程(见板带轧制规程设计)
speed schedule for plate and strip rolling
bandai zhazhi sudu guieheng板带轧制速度规程(speed seheduxe fo:plateand strip rolling)见板带札制规程设计。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条