1) arc encoder
![点击朗读](/dictall/images/read.gif)
弧形光栅尺
1.
Research on the principle of measure large rotation shaft torque using the arc encoder;
![点击朗读](/dictall/images/read.gif)
利用弧形光栅尺测量大型转轴扭矩的原理研究
2) Curved grating
![点击朗读](/dictall/images/read.gif)
弧光栅
3) raster ruler
![点击朗读](/dictall/images/read.gif)
光栅尺
1.
It fully utilizes the wealthy peripheral and high-speed calculation funct i on of DSP, and uses the double CPU constituted PC and DSP, by utilizing PWM cont rol strategies, using a raster ruler as sensor of speed and position, and implem ents the task of position and speed control.
充分利用TMS320LF2407控制器外设接口丰富及运算速度快的特点,以PC机作为上位机、DSP作为下位机,以光栅尺作为位置和速度传感器,通过PWM控制策略实现对直流直线电机的位置和速度控制。
2.
The focusing mechanism is composed of liner motor,liner orbit and raster ruler;Designed some tests in allusion to fulfill the need of this mechanism,and carried through tests to verify the precision,shake and high and low temperature;then.
调焦机构由直线电机、直线导轨、光栅尺等组成,针对航空光学系统对调焦机构的要求,对该调焦机构的试验过程进行了设计,针对控制精度、晃动和高低温进行了试验,并分析了影响调焦机构精度的主要因素。
3.
The controller accepts the PC\'s order and triggers the pulse signal which can drive the step motor to move;at the same time,the raster ruler collects the actual displacement signal to feed back and compare with the theoretic value aiming at closeing with the desirable position uttermostly.
系统控制器接受上位机指令触发脉冲信号以驱动步进电机转动;同时,光栅尺采集实际位移信号进行反馈,与理论值进行比较校正,使数控平台最大限度接近理论位置。
4) grating
[英]['ɡreɪtɪŋ] [美]['gretɪŋ]
![点击朗读](/dictall/images/read.gif)
光栅尺
1.
Design of displacement measurement for grating virtual oscilloscope based on labVIEW and dynamic link library;
基于LabVIEW与动态链接库的光栅尺位移虚拟示波器的设计
2.
This paper focuses on the way grating is counted by GAL and microcontroller.
![点击朗读](/dictall/images/read.gif)
提出了采用多零位信号自动消除大量程光栅尺计数累积误差的方法 ,并通过在光栅尺的非零位处对计数值和清零次数的修改 ,解决了引入零位信号后光栅尺的绝对位移难以求取的问题 ,通过采用逐步检测的方法判断计数值是否被误清零而出错 ,并根据出错前的计数值让光栅尺通过最近的零位 ,自动修正光栅尺的计数
3.
At the same time the grating’s high precision is also more important to the CMM .
![点击朗读](/dictall/images/read.gif)
本文研制了基于USB接口的光栅尺接口卡,采用CPLD对光栅尺输出信号进行处理,并通过USB接口实现光栅尺接口卡与计算机之间的通讯。
5) Grating scale
![点击朗读](/dictall/images/read.gif)
光栅尺
1.
Using grating scale as sensor,which is fixed on NC machine tool,the equipment is easy to be used to measure the axial position error in x and y and z directions of NC machine tool,respectively.
该装置以光栅尺为测量传感器,光栅尺依靠附件固定在数控机床上,操作简易,并且能够分别测量数控机床x,y,z方向的轴向位置误差。
6) double grating scale
![点击朗读](/dictall/images/read.gif)
双光栅尺
1.
A high speed and high precision displacement measurement method using double grating scales;
基于双光栅尺的高速高精度位移测量方法
补充资料:千尺幢与百尺峡
游人过“回心石”后,即是华山第一险道——千尺幢和百尺峡,千尺幢往上看为一线天,往下望如深井,它形如裂隙,四壁直立,凿石为梯,游人经此,如同穿行井中,上有青天召唤,下有阴风催促,到达幢口攀出井外,顿有超尘脱俗之感。 在山崖极陡处开出的一条小路,共370多磴石级,石级的宽度只能容纳一个人上下,两旁挂着铁索,人们手攀铁索,一步步向上登,往上看,只见一线天开;往下看,就像站在深井上。千尺幢的顶端,就像井口一样。这里的崖壁上刻有“太华咽喉”、“气吞东瀛”的字样。其形势真像咽喉一样的险要。当小心翼翼的游人,手脚并用地爬上千尺幢,再往前走,还有一处险路──百尺峡。出峡,过仙人桥 ,前面又是一段险路“老君犁沟”,传说是太上老君牵来自己的青牛,在这个陡壁处犁出的一条小路。走完这段有500多个石级的“老君犁沟”,就登上了海拔1500多米的北峰。这里四面悬崖绝壁,恰如一座平台,因而又叫云台峰。 过千尺幢,马上就是百尺峡,虽没有千尺幢那么长,仅46米,石阶91级,但仍是华山天险之一。这里势危坡陡,石壁峭立,通道狭窄,且有悬石,摇摇欲坠。游人至此都心惊胆颤。明顾端木有诗状其险曰:“幢去峡复来,天险不可瞬。虽云百尺峡,一尺一千仞。” 千尺幢、百尺峡的台阶都是从明末清初开始凿的,民国时几经加固,解放后又多次修整。一九八五年又凿为复道,游人上下各行其道。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条