1) Remote numerical simulation
远程数值仿真
2) remote NC machining simulation
远程数控仿真
3) Remote simulation
远程仿真
1.
Design of remote simulation system for power plant boilers;
电站锅炉远程仿真系统设计
2.
The Matlab network application and its mechanism are studied;a method of developing the network educational experiment system based on Matlab Web Server is presented;by using Web technology and its CGI function,the Matlab network application is developed and the process control remote simulation system is created.
在分析Matlab的网络应用及其运行机制的基础上,提出基于Matlab Web Server开发网络实验系统的方法,并运用Web技术及其CGI功能,开发Matlab网络应用程序,建立B/S模式的过程控制远程仿真实验系统。
3.
The idea of programming of professional application software, such as remote real-time monitor, remote simulation, remote economical analysis, remote accident-diagnosis were also given.
介绍了远程实时监视、远程经济性分析、远程仿真、远程故障诊断等专业软件的开发思路 。
4) numerical simulation
数值仿真
1.
Welding assembly deformation numerical simulation based on 'Local-Global' Method;
基于“局部-整体”映射法的焊接装配变形数值仿真
2.
Numerical Simulation for the Variable Offset Regrinding of Carbide Gear Hobs;
硬质合金滚刀变偏距重磨的数值仿真
3.
Prediction and numerical simulation of the aging process of three-way catalytic converter;
三效催化转化器老化过程预测及数值仿真
5) digital simulation
数值仿真
1.
The research and application of digital simulation in nuclear signal;
核信号数值仿真方法的研究及应用
2.
By digital simulation,the phenomenon is explained,and the effect of starting acceleration and damping of system on the starting process is studied.
从动力学理论出发 ,建立系统的力学模型和动力学方程 ,并通过计算机数值仿真 ,揭示了产生这种现象的机理 ,分析了启动加速度和系统阻尼对启动过程的影响 ,给出了改善平筛启动性能的途径 。
3.
For the current helicopter of single main rotor with tail rotor, the effect of inflow models with different characteristics on helicopter trim and digital simulation was discussed.
以常规单旋翼带尾桨直升机为对象，讨论均匀与非均匀入流模型对直升机飞行数值仿真的影响。
6) numerical emulation
数值仿真
1.
The numerical emulation of linear characteristics of optical pulse propagation in microring coupled-resonator optical waveguides;
光脉冲在微环耦合谐振光波导中传输线性特性的数值仿真
2.
At last,concrete example is analyzed by numerical emulation of computer.
并结合实例通过计算机数值仿真进行分析,说明了这两种方法都是有效的和可行的。
3.
Relative class to describing numerical emulation of thick cylinder temperature field was abstracted accordi ng to object-oriented programming method.
在建立了厚壁圆筒在复杂边界条件下的传热数学模型并用有限差分法进行数值求解的基础上，按照面向对象技术的程序设计方法，抽象出描述厚壁圆筒温度场数值仿真相关的类，开发了厚壁圆筒三维温度场数值仿真软件系统，利用ＯｐｅｎＧＬ实现了三维温度计算数据场的可视化，并将仿真结果与实测结果进行了对比分析。
补充资料：数值积分法仿真
数值积分法仿真
simulation with numerical integration method
具有单点初值的系统来说，仿真计算难以自启动，为此需要用单步法来帮助;另外，它还要求在整个仿真过程中仿真步长保持不变。表1亚当斯法系数表‘X二·*一。一+气自:主二一，一)┌────┬──┬───┬────┬───┬───┬────────┐│名称 │yl │y2 │y3 │y4 │y5 │截断误差 │├────┼──┼───┼────┼───┼───┼────────┤│一阶显式│0 │l │ │ │ │冬*Zx‘，， ││ │ │ │ │ │ │‘ │├────┼──┼───┼────┼───┼───┼────────┤│二阶显式│0 │3/2 │一1/2 │ │ │5:、(、、 ││ │ │ │ │ │ │丫二于九一x、一 ││ │ │ │ │ │ │1乙 │├────┼──┼───┼────┼───┼───┼────────┤│三阶显式│0 │23/12 │一16/12 │5/12 │ │去h‘X“， │├────┼──┼───┼────┼───┼───┼────────┤│四阶显式│0 │55/24 │一59/24 │37/24 │一9/24│251.，‘，、 ││ │ │ │ │ │ │二二丈左一x、- ││ │ │ │ │ │ │l‘U │├────┼──┼───┼────┼───┼───┼────────┤│一阶隐式│l │ │ │ │ │一冬，，二‘，，││ │ │ │ │ │ │ 乙 │├────┼──┼───┼────┼───┼───┼────────┤│二阶隐式│l/2 │l/2 │ │ │ │一劣。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条