1) switching voltage
开关电压
1.
05 nm,the switching voltage is about 8.
05 nm,开关电压约为8。
2.
To get the minimum loss and switching voltage,the electrode parameters are optimized.
为了获得最小的模式损耗和开关电压,优化了电极厚度、电极宽度和电极间距。
2) zero voltage switch
零电压开关
1.
Dual switch forward converter with zero voltage switch active clamp;
一种零电压开关有源箝位双管正激变换器
2.
Decreasing the circumfluence wastage and harmonizing the contradiction between duty circle loss and realizing zero voltage switch (ZVS) of the lagging switches in large scope of the load as well as the input voltage are two problems which need to research for phase-shift full bridge (PS-FB) DC/DC converter.
与传统电路相比,它将近降低了1/2的开关管的环流能量损耗,并且能够在较宽的负载范围内实现滞后管零电压开关和极小的占空比丢失,有效地提高变换器的效率。
3.
The paper describes the working process of halfbridge zero voltage switch multiresonant power supply,its design method,and the working principle of 48 V resonant power supply.
介绍了半桥零电压开关多谐振电源的工作过程、设计方法及４８Ｖ谐振电源的工作原理，并对电源工作时的有关电压波形作了简要分析。
3) zero-voltage-switching
零电压开关
1.
The new theoretical analysis method for the phase-shifted zero-voltage-switching DC/DC PWM full-bridge converter;
对移相控制零电压开关PWM全桥直流变换器的新型理论分析方法
2.
Zero-Voltage-Switching Multi-Resonant Three Level Converters;
零电压开关多谐振三电平直流变换器
3.
Research of active clamp Zero-Voltage-Switching forward converter on circuit characteristics and parameter design are done in this paper.
对有源箝位正激变换器的电路拓扑、运行模式、参数设计等问题进行了分析和研究,说明该电路拓扑能有效降低主开关管电压应力,实现零电压开关,还可实现变压器铁芯的磁复位。
4) zero-voltage switching
零电压开关
1.
The performance of power supply is improved by adopting high frequency and zero-voltage switching more-resonant converter(ZVS-MRC) mode,and achieved high power density,high conversion efficiency and high reliability.
通过采用零电压开关多谐振变换器和提高高压电源的工作频率,使高压电源的性能得到很大的提高,该高压电源具有功率密度高、效率高、可靠性高等优点。
2.
A novel aeronauitc single-stage single-switch active power factor correction converter is proposed,which is an improved SEPIC topology operating in zero-voltage switching with the active clamp cell.
详细分析了新拓扑的特点和工作原理 ,给出了实现零电压开关的条件。
5) ZVS
零电压开关
1.
A ZVS Bi-directional DC-DC Converter;
新型零电压开关双向直流变换电源
2.
ZVS PWM converter with coupled inductor;
一种采用耦合电感的零电压开关脉宽调制式变流器
3.
A Phase-shifted Full-bridge ZVS Converter with Auxiliary Branch;
一种带辅助支路的移相全桥零电压开关变换器
6) voltage soft-switch
电压软开关
1.
The principle of voltage soft-switch inverting, the method of measuring welding current by magnetic-loop and their advantages are discussed.
介绍了采用ＩＧＢＴ作为开关元件的弧焊逆变器，论述了电压软开关逆变原理、弧焊电流磁环检测方法以及其优点，介绍了电流调节器的应用。
补充资料：标准操作冲击电压波形(见冲击电压发生器)
标准操作冲击电压波形(见冲击电压发生器)
standard switching impulse voltage waveform
b .oozhun CooZuo ChongJld，onyo boxlng标准操作冲击电压波形(standard switchingimpulse voltage waveform)见冲击电压发生器。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条