1) transducer fault tolerance
传感器容错
1.
Considering the particularity of the deep seabed environment,a method of transducer fault tolerance for mining robot is proposed.
针对深海环境的特殊性,对集矿机传感器容错方法进行了研究;利用双传感器冗余策略,同时把加权融合算法和灰色预测模型结合起来,构建一个基于混合冗余的传感器容错系统,用于集矿机传感器故障的检测、分离和容错,保证了集矿机双传感器在不同时发生故障的情况下系统输出始终有效;仿真结果验证了这一方法的可行性。
2) capacitance sensor
电容传感器
1.
Detector for water content of molding sand with capacitance sensor;
采用电容传感器的型砂含水率检测仪
2.
Cylinder Surface Capacitance Sensor Applied to Examine Yarn Irregularity;
应用于条干均匀检测的长直圆柱面电容传感器
3.
Capacitance Sensor Application in the Asphalt Content Measurement;
电容传感器在沥青含量测量中的应用
3) capacitor sensor
电容传感器
1.
This paper introducs that how to accomplish the automatic nesting and punch cutting process cooperated with industry control computer for flame cutting machine automatic nest system and capacitor sensor automatic adjusting system , it had solved the cutting problem of thick metal material in traditional technology.
介绍了火焰切割机自动套料切割系统、电容传感器自动调高系统是如何在工控机配合下自动完成套料和穿孔切割的全过程,解决了传统技术在厚板切割中的难题。
2.
This article compares several methods of on-line measurement of water content in crude oil, mainly gives a detailed introduction to some kinds of ways using capacitor sensor to measure different parameters.
对原油含水率在线测量的几种主要方法进行了比较,主要介绍了使用电容传感器测量不同参数的几种方法。
3.
Letting the drop flow down through a pair of locatoon sensors and a plate capacitor sensor,the sensors are combined with chip MAX038 and single chip on the hardware,to obtain multi-parameters information on drop volume,velocity and flow rate by testing frequency.
使液滴垂直下落经过两个位置传感器和一个平板电容传感器,在硬件上将传感器与MAX038和单片机结合,通过测频法获得液滴的体积、滴速、流量等多参数信息。
4) capacitive transducer
容栅传感器
1.
Structure improvement and precision analysis of disk capacitive transducer;
圆容栅传感器结构改进及其精度分析
2.
Application of capacitive transducer in automobile tire inflation gun;
容栅传感器在汽车轮胎充气枪中的应用
3.
This paper introduced basic principle of capacitive transducer and its shortcomings,put forward the research history,status and development prospect.
容栅传感器是在变面积型电容传感器的基础上发展成的,是在光栅、磁栅、同步感应器之后出现的一种新型大位移传感器。
5) Capacitive sensor
电容传感器
1.
Electrode structure and characteristics of uniplanar scattering-field capacitive sensors;
同面散射场电容传感器的电极结构与敏感特性
2.
The Principle and Design of Radiofrequency Capacitive Sensor;
射频电容传感器的原理与设计
3.
The working principles and mathematical model of the capacitive sensor with electrodes of arbitrary shape;
任意结构形状的电容传感器原理和数学模型
6) capacitance transducer
电容传感器
1.
The problems of capacitance transducer and their solutions
电容传感器在使用中存在的几个问题及处理方法
2.
This paper describes the capacitance transducer used in the yarn irregularity measuring system by the finite element method.
提出了将有限元法引到条干不均匀测试中电容传感器的研究。
3.
Applying capacitance transducer,the deformation of the leaf spring caused by the loading of vehicles is transformed into voltage signal.
采用电容传感器将汽车由于载重引起的钢板弹簧变形转换成电压信号,建立数学模型,设计出非线性信号转换成线性信号的电路,得出V-M的线性关系,并将汽车的前后轴测量量相加得整车载重量信号,经A/D转换和译码,显示出汽车载重量的读数。
补充资料：变压器式传感器
利用变压器作用原理把被测位移转换为初、次级线圈互感变化的变磁阻式传感器。它由两个或多个带铁心的线圈构成，初、次级线圈间的互感能随衔铁或两个线圈间的相对移动而改变。当用适当频率的电压激励初级线圈时,次级线圈的输出电压将随互感的改变而变化,从而将被测位移转换为电压输出。这种传感器在使用中常采取两个同名端串接的次级绕组线圈，以差动方式输出，所以又称为差动变压器式传感器。变压器式传感器的特点与电感式传感器相同，有时亦称电感式传感器。但变压器式传感器在设计上具有更大的灵活性，应用更为广泛。旋转变压器、感应同步器、自整角机都属于变压器式传感器。变压器式传感器主要用于测量位移和能转换成位移量的力、张力、压力、压差、加速度、应变、流量、厚度、比重、转矩等参量。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条