1)  electro-optic modulator
双通道电光调制器
2)  double-pass
双通
1.
By using double-pass configuration and recycling backward C-band ASE,the pump power for(L-band) ASE generation is much economized.
通过采用双通结构和循环利用C波段放大自发辐射,极大地节省了用于产生L波段放大自发辐射所需的泵光功率。
3)  double channel
双通道
1.
The design of double channel polarization tunable filter of photonic crystal;
光子晶体双通道可调谐偏振滤波器的设计
2.
With the methods of number calculation and theoretical analysis used in the designed one-dimensional photonic crystal,it is concluded that the wavelength of double channel is linearly varied with optical thickness of doping and the FWHM of double channel decreases with the increase of the refractive index of photonic crystal.
通过对设计出的一维掺杂光子晶体的数值计算和理论分析,得出:双通道透射峰的波长随杂质光学厚度呈线性变化和双通道透射峰的半高宽随光子晶体折射率n2的增加而减小。
3.
It introduces the optimal double channel transmission technique for each service and put forward the suggestion for the development of Guangdong power telecommunication network,which will promote the network construction,resources optimization and reliability enhancement of Guangdong power telecommunication network.
根据中国南方电网公司在制订电力企业安全标准中提出的电力生产业务信息需双通道备份的要求,为了提高广东电网的安全可靠性,文章在对广东电网运行的各类业务信息的传输特点、性能要求、分布特征进行调查、分析的基础上,逐个为每种业务选择最佳的传输技术双通道搭配组合,并从总体上给出了广东电信通信网的建设思路及其他辅助设施配套方案,对广东电力通信网络建设、优化资源利用、增强业务传输的可靠性,有着积极的促进作用。
4)  two-channel
双通道
1.
design and Realization of Two-Channel Pulse to Pulse Frequency Shifting RCS Testing System;
双通道脉间变频格式RCS测试系统
2.
A new type of 2SZKB3060 low noise two-channel linear vibration screen is developed.
分析了振动筛噪声的发生机理、特点及噪声与振动筛大型化的结构形式的关系 ,研究了降低噪声的方法和结构 ,研制了 2SZKB30 60低噪声双通道直线振动筛。
3.
The method of two-channel computer-generated hologram manufactured by matlab software is proposed,and a simple optical reconstruction method is also proposed.
介绍用matlab软件制作一种双通道计算全息图的方法,并给出一种简单的光学再现方法。
5)  dual channel
双通道
1.
The system is applied to the dual channel portable device in the field of vibration analyzing.
本文介绍了一种基于ARM体系结构处理器的嵌入式设备的设计理念,设计了一种应用于振动测量分析领域的双通道便携式仪器。
2.
This paper describes the operation mechanism of dual channel TE 21 mode tracking system.
阐述了双通道 TE2 1 模跟踪系统的工作原理 ,分析了馈线网络性能的变化及两信道幅相不平衡对Δ AZ与Δ EL的交叉耦合的影响 ,给出了交叉耦合时误差信号收敛的迹线图 ,对研制差模跟踪系统具有一定的意
3.
With the help of a numerical calculation model for three dimensional flows a single burner jet flow field calculation was performed of a dual channel dilute dense pulverized coal burner fitted on a 130 t/h boiler.
用三维流动数值计算模型 ,对一台 130吨 /小时锅炉采用双通道浓淡煤粉燃烧器的单只燃烧器喷口流场计算和冷态实验结果比较证明了该燃烧器能够形成回流区 ,且调节腰部风可以改变回流区的长度。
6)  Double-channel
双通道
1.
In order to avoid cross couplings between the vertical and lateral motion,decoupling control of a double-channel control rolling missile autopilot was studied.
为消除旋转导弹自旋所带来的纵向与侧向运动的交叉耦合,进行了双通道控制旋转导弹自动驾驶仪回路解耦控制研究。
2.
Based on the characteristics of rolling missile with double-channel control,the autopilot loop is transferred from body coordinate system to quasi-body coordinate system after a rolling transfer.
根据双通道控制旋转导弹的特点,通过旋转变换,将弹体坐标系下的自动驾驶仪回路变换到准弹体坐标系下,并比较了与倾斜稳定导弹标准自动驾驶仪的区别。
3.
The design,used double-channel and pipline technology to improve the throughput and the average response time of the storage system.
采用了双通道和流水线设计,提高了存储系统的吞吐量、降低平均响应时间。
参考词条
补充资料:调制器


调制器
modulator

  t loozh一日-调制器(modulator)用调制信号控制载波信号三个参数(振幅、频率或相位)之一瞬时值的电子电路。被控参数为振幅时称为调幅器(a mnlitudemodulator),被控参数为频率时称为调频器(frequeneymodulator),被控参数为相位时称为调相器(phasemodulator)。调制器在通信、信号处理和自动控制系统中得到广泛应用。 调幅器实现调幅的具体电路有多种。图1(a)所示为利用一个模拟乘法器来实现的原理电路。um(t)为调制信号,u。(t)为载波信号,且峡>>aha,K为模拟乘法器的增益系数。设 u。(t)一Urneos%t,u。(t)一Uoeo。叭t,则 u‘。(t)~KUmUoeos叽teos峡t一U‘。eos田ct(1)二类。间接调频的原理是:先对调制信号进行积分,再一︵f︸日勺f,kHz┌─┬─┐│ │ │└─┴─┘冷b嘴防︺ “仁 八U‘.l.l..L产J︺。器f,k】Jz△f二7。7kljz“m(f)“。(z)┌─┐ │X │┌──┐│ ││带通││ ││ 儿││ │└──┘└─┘ _图2双边带调制的频谱 (a)调制信号u。(t)的频谱;(b)已调制信号 。飞(t)的频谱;(c)带通滤波器输出的上边带 uo(t)的频谱;(d)取用上边带信号的框图对载波信号进行调相,其输出即为已调频的信号。间接调频的优点是载波频率稳定,但频移小,电路复杂。直接调频是直接改变振荡回路的元件参数或直接控制振荡器的工作状态来实现调频的。它的优点是频移较大,线路简单,但载波频率稳定性较差。图3是利用变容二极管的直接调频电路。图中:v七Ll、cl、凡、RZ、c:构成正弦波振荡电路;vZ、LZ和电源U组成变容二极管偏置电路;。。(t)为调制信号;u。(t)为已调频信号;瓜是高频扼流圈,它阻止高频输出电压u。(t)通过,以免影响调制电压um(t),而允许低频的调制电压um(,)通过去改变变容二极管vZ的两端电压,从而改变v琴的电容,达到改变正弦振荡器输出频率的目的。- 图3用变容二极管的调频电路 调相器调相器的电路也可分为直接调相和间接调相二类,图4为利用移相网络来直接调相的原理电路、图中yl组成倒相电路,。。(t)为载波电压,集电式(l)中,乘法器的输出电压振幅酬。一K队Umcos叽t受调制信号蝙(t)控制,故称振幅调制器,简称调幅器。式(1)又可化为U,。(右)一音K-U·U。「。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。