1) adhesive mixture
橡胶配混
2) rubber mixing
橡胶混炼
1.
Thus, this method realizes the full automatic optimizing in rubber mixing process by computer real time control.
首先研究了以橡胶混炼工艺参数为因素，采用区间划分因素的水平，自动确立优化目标和需优化因素的方法。
2.
The instantaneous power control and the MGKJ control system are used to realize the intelectual facultiescontrolled rubber mixing process on single internal mixer including automatic measurement of mix quality on line and automatic optimization of mixing process.
论述了密炼机橡胶混炼工艺智能控制的重要性：自动控制只有智能化才能确保混炼工艺优良，产品质量合格；指出了智能控制的条件、内容和途径：采用瞬时功率控制法及其控制系统ＭＧＫＪ可实现混炼胶质量自动在线检测和混炼工艺自动优化等单台密炼机混炼工艺的智能控制。
3.
The theory of the method of controlling instantaneous power on the mixing technology was composed of the mechanism of the rubber mixing process,the rheologic theory on the internal mixer,and the power curve in mixing process.
橡胶密炼机混炼工艺瞬时功率控制法的理论由３部分组成：橡胶混炼过程的机理、密炼机流变理论和混炼过程功率曲线。
3) blending rubber
橡胶共混
1.
Such result shows that SP5 can substitute 40MS,importing from foreign country, applying in blending rubber as homogenizing agentWith aluminum chloride as catalyst, the SP5 was prepared by co-polymerizing of Methyl methacrylate and C9.
论文在总结了国内外石油树脂的研究现状和发展趋势的基础上,用催化聚合法合成了改性石油树脂SP5,用来代替进口均匀剂产品40MS在橡胶共混中的应用,并进行了40MS与SP5理化性能和应用性能的对比研究。
4) rubber formula
橡胶配方
1.
Application of regression analysis to rubber formulation experiment;
回归分析法在橡胶配方试验中的应用
2.
Group method of data handling, GMDH, was inducted in the design of rubber formula.
将GMDH引入橡胶配方设计中 ,提出一种配方过程非线性建模方法 ,经试验检证 ,结果较
3.
The rubber formula with good comprehensive properties could be quantitivelyobtained by using Uniform Design Method and Multi--attribute Determination Method(MADM).
运用均匀设计法，通过多属性决策方法，定量地求得综合性能好的橡胶配方。
5) rubber formulation
橡胶配方
1.
Fuzzy synthetic evaluation for rubber formulation;
橡胶配方的模糊综合评判
2.
Application of simulated annealing algorithm in optimization of rubber formulation;
模拟退火算法在橡胶配方优化设计中的应用
6) rubber recipe
橡胶配方
1.
On the basis of combination of uniform design and convensional network method,the uniform network method for rubber recipe optimization was proposed.
借助均匀设计表，在均匀网格法的基础上选择优化计算点，用工作过程模拟计算程序计算选定点的胶料物理性能值，再经过可行性筛选后进行橡胶配方优选。
2.
The cost reduction of the rubber recipe design is discussed.
讨论了橡胶配方设计中，在保持胶料较高物理机械性能的条件下，应用废短纤维硫化胶粉、改性轻钙补强填充橡胶基质，以达到降低成本和谋求经济技术上的合理。
3.
It is introduced to design rubber recipe.
本工作将其引入橡胶配方设计中，提出一种配方过程非线性建模方法，初步结果令人满意。
补充资料：配成复混肥料(见复混肥料)
配成复混肥料(见复混肥料)
肥料。配成复混肥料见复混
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条