1) direct air-cooling civil structure
直接空冷土建结构
2) direct air cooled condenser support platform
直接空冷结构体系
1.
Model test on behavior of direct air cooled condenser support platform under service load and earthquake action;
工作荷载与地震作用下直接空冷结构体系模型试验研究
2.
Study on the seismic behavior of direct air cooled condenser support platform based on primary-secondary system coupling effect
基于主子系统耦合效应的直接空冷结构体系抗震性能研究
3) direct air cooling
直接空冷
1.
Research on key technologies for the localization of direct air cooling system;
直接空冷系统国产化关键技术研究
2.
Test and Calibration on Vacuum leakage of 600 MW Direct Air Cooling Unit;
600 MW直接空冷机组真空严密性试验和结果标定
3.
Acceptance standard investigation of vacuum tightness of direct air cooling generating unit;
直接空冷机组真空严密性验收标准探讨
4) direct air-cooling
直接空冷
1.
Research on unequal settlement of direct air-cooling system in thermal power plants;
火力发电厂直接空冷结构体系局部沉降研究
2.
Analysis on the energy-saving performance of frequency conversion and speed governing system for direct air-cooling fans;
直接空冷机组空冷风机变频调速的节能分析
3.
Control and operation on direct air-cooling system of thermal power plant 300MW unit
火电厂300MW机组直接空冷系统的控制与运行
5) ACC
直接空冷
1.
Application and Research on Peak Cooling System for ACC;
直接空冷凝结器尖峰冷却系统的研究与应用
2.
The New Characteristics of ACC Units Start-up;
直接空冷机组的启动特性
3.
According to analysis on ACC data of No.
根据国电大同发电有限责任公司8号机组168 h满负荷试运期间的ACC数据分析,对直接空冷机组夏季高背压的特点进行了归纳和总结,并提出了自然风对机组背压的影响,最后针对背压变化对机组经济性的影响进行了量化分析。
6) direct dry cooling
直接空冷
1.
Variety-duty characteristic analysis of direct dry cooling system of 600 MW power plant;
600MW直接空冷系统变工况特性分析
2.
As the first application of direct dry cooling technology in large size thermal power plants, two 200MW air- cooled condenser generating units of DaTang YunGang Thermal Power Corporation were put into operation in Datong city of Shanxi province at the end of 2003.
作为空冷技术在我国大型火电项目的首次应用,位于山西省大同市的大唐云冈热电有限责任公司于2003年底率先投产了2台200MW直接空冷机组。
补充资料：钢结构和二冷室
钢结构和二冷室
steel structure and cooling chamber
gangliegou he er{engsh{钢结构和二冷室(steel strueture and eoolingchamber)用于支撑连续铸钢主要设备及用于连铸操作场地的结构件为连铸钢结构，主要包括操作平台和各种支座。二冷室是钢板焊接结构，将铸坯导向和二次冷却装置封闭起来，防止铸坯喷水冷却过程中产生的蒸汽外溢。二冷室设有门和窥视孔，供观察和在检修时，方便地进入二冷室。 (俞姜)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条