1) Bolts binding
螺检联接
2) thread connection
螺纹联接
1.
Research of anti-looseness energy storage equipment for thread connection;
螺纹联接蓄能防松缓装置的研究
2.
Based on research and analysis of these papers, the up-to-date achievements and application in casing technical field regarding casing material, thread connection, casing string mechanics, casing string design, safety and reliability were introduced.
笔者对80年代后期以来有关油气井套管技术方面的文献进行了系统检索,并在分析、研究这些文献的基础上,分别从套管的材质、螺纹联接、套管柱力学分析、套管柱设计以及安全可靠性研究等方面较详细地介绍了国内外在套管技术领域的最新研究成果和应用现状,指出了用于深井、超深井、高酸性气井等新型管材产品的开发、新型特殊螺纹的开发、套管柱设计专家系统、套损机理及综合防治技术以及套管钻井技术等将成为油气井套管技术今后的重点发展方向。
3.
This paper started with the dynamical model of thread connections in the process of oil tube screwing clamp, analyze the parameters impacting the stress of thread connections, through the infinite element method, stimulate the screwing clamp of casing in same conditions which have different parameters such as taper、pitch、thread form angle, get the imp.
本文通过建立油管上扣过程中螺纹联接的力学模型来分析油管螺纹参数对螺纹联接受力的影响规律,借助于有限元分析的方法,对不同螺纹参数(锥度、螺距、牙型角)的油管相同工况下的上扣过程进行仿真,最终确定了螺纹参数对螺纹联接应力的影响规律,为螺纹参数的优化设计、改善螺纹载荷的分布进而减少螺纹粘扣失效的发生提供了依据;分析上扣过程中液压钳的使用对螺纹粘扣的影响,分别计算了液压钳在规范操作、误操作以及改进液压钳卡紧方式等情况下油管螺纹的应力状态,结果指出,液压钳卡紧位置对螺纹应力的影响较大,所以规范现场操作十分必要,改进后的液压钳三点夹持油管,与传统液压钳相比,明显降低了螺纹的等效应力和接触应力,在一定意义上也提高了油管的抗粘扣性能,可以认为,改进措施是成功的。
3) threaded connection
螺纹联接
1.
Real time monitor of casing thread makeup torque is one of important means to improve the quality of casing threaded connection during the process of casing-runing.
在下套管作业过程中 ,对套管紧螺纹扭矩的实时监控是提高套管螺纹联接质量的重要方法之一。
2.
The main causes is analysed for looseness of the threaded connection on pumping unit crank pin and the corresponding preventive measures are proposed.
分析抽油机曲柄销螺纹联接在使用中发生松动的主要原因 ,并提出相应的预防措施 ;设计了新的防松装置 ,简要介绍其结构和工作原理 ,它具有工作可靠、防松效果好等特点 ;给出了曲柄销联接螺母的最小拧紧力矩计算公式。
3.
Recommends and analyzes the characteristic control methods of axial pre-tightening force in threaded connection for technical reference.
介绍分析了螺纹联接的几种轴向预紧力的控制方法及特点,供工程选用。
4) Adapting screw
联接螺钉
5) Connecting bolt
联接螺栓
1.
This paper analyses the working state of E line up crane beams and connecting bolt in the whole mould wrokshop by means of testing and finite element methods.
利用测试手段和有限元计算对整模车间Ｅ列吊车梁及联接螺栓的工作状态进行了分析，找出梁间联接螺栓的破坏原因，并提出改进方案，为保证吊车梁正常运行提供了科学依据。
6) screw thread connection
螺纹联接
1.
Measures to prevent invalidation of screw thread connection and its application on type HXD1 locomotive;
螺纹联接防失效措施及其在HX_D1型机车上的应用
2.
A survey of anti-loosening method of screw thread connection;
螺纹联接防松方法的评述
3.
It is verified through practice that this test-bed could effectively test the anti-loosening property of screw thread connections.
实践证明,该试验台能有效测试螺纹联接的防松性能。
补充资料：检检
1.有法度貌。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条