1) Surface disposing line
表面处理线
2) surface treatment
表面处理
1.
Effect of fiber surface treatment on the microstructure and mechanical properties of mesophase pitch-based C/C composites;
纤维表面处理对C/C复合材料组织与性能的影响
2.
Influence of NiTi alloy fiber surface treatment on shear strength of resin matrix composites;
NiTi合金纤维表面处理对树脂基复合材料界面剪切性能的影响
3.
Effect of surface treatment methods on properties of adhesive;
表面处理方法对胶粘剂性能的影响
3) surface modification
表面处理
1.
Continuous surface modification of UHMWPE fibers;
连续表面处理超高分子量聚乙烯纤维的研究
2.
Experimental research on surface modification by EDM through TiC semi-sintered electrode;
利用TiC半烧结体电极进行电火花表面处理的实验研究
3.
Synthesis of addition liquid vinylsiloxane rubberⅡ.Influence of surface modification of fumed silica on properties of silicone rubber;
加成型液体乙烯基硅橡胶的研制 Ⅱ.白炭黑表面处理对硅橡胶性能的影响
4) surface pretreatment
表面处理
1.
EIS study of multilayer organic coatings on steel with different surface pretreatments;
不同表面处理条件下复合涂层体系失效过程的EIS特征
2.
Effect of fiber surface pretreatment on the performances of carbon/glass hybrid fiber reinforced sealing composite materials;
表面处理对玻纤/碳纤增强橡胶基密封复合材料性能的影响
3.
Improving on Surface pretreatment of Assembling Capacitor;
集合式电容器表面处理的质量改进
5) surface processing
表面处理
1.
surface processing+composite rolling+heat treatment were carried out.
进行了钢-铜、钢-铝冷轧复合实验,即表面处理+复合轧制+轧后热处理。
2.
The effects of additives and surface processing on halogenation frosting are further studied.
本文介绍了镁胶凝材料制品在使用过程中容易产生的返卤泛霜现象形成的原因,测试方法,通过加入外加剂进行改性,并进一步探讨了调和剂、外加剂和表面处理对返卤泛霜的影响。
3.
It illustrates anti-corrosive measures of steel structure,summarizes installation of steel structure and its check examination,and discusses method of surface processing before painting,which to improve quality of steel structure and competition of enterprise.
阐述了钢结构的防腐蚀措施,总结了钢结构的安装要点及钢结构的验收,探讨了涂漆前表面处理的方法,以提高钢结构产品的质量,从而增强企业竞争力。
6) surface treating
表面处理
1.
CE modified by nano-SiC with KH-560 and SEA-171 as surface treating agent
KH-560和SEA-171表面处理纳米SiC改性氰酸酯树脂
2.
Effect of surface treating technology in improving the quality of mould was introduced in brief.
简要地概述了表面处理技术在提高模具质量中的作用,按物理表面处理法、化学表面处理法和表面覆层处理法对模具表面处理技术进行了综述。
3.
The results also show the differences of influence between two kinds of surface treating on the initial combustion.
通过30mm短管炮内弹道试验和点火模拟装置试验,研究了钝感与包覆两种不同表面处理工艺的叠氮硝胺发射药膛内起始燃烧性能。
补充资料：帘线表面活化处理
分子式：
CAS号：
性质：在聚酯纤维的纺丝过程牛进行表面活化处理，活化剂有封闭异氰酸酯、环氧树脂、油酸酯等。经活化处理的帘线织成帘布，采用一浴法浸渍液处理后即可得到良好的黏合效果。
CAS号：
性质：在聚酯纤维的纺丝过程牛进行表面活化处理，活化剂有封闭异氰酸酯、环氧树脂、油酸酯等。经活化处理的帘线织成帘布，采用一浴法浸渍液处理后即可得到良好的黏合效果。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条