1) GCU
发电机控制装置
2) power generation
发电
1.
Experimental study on the co-firing power generation of municipal solid waste and biomass;
城市生活垃圾与生物质混烧发电技术的实验研究
2.
Application of refuse incineration-power generation technology in China;
垃圾焚烧发电技术在我国的应用
3.
Comparative study on biomass power generation technologies;
生物质发电技术分析比较
3) generate electricity
发电
1.
Thermoelectric materials used for the conversation between thermal energy and electric energy make it possible to manufacture no pollution, no mechanical moving and high effective equipments which can be used for generate electricity and refrigeration.
热电材料是能够使热能与电能直接相互转化的材料,它的出现为制造无污染、无机械运动、高效率的发电和制冷设备提供了广阔前景。
2.
It can generate electricity through blowing the emitting gas into generator ,it can not only make full use of the energy resources,protect the environment,but also create better economic and social benefits.
为充分利用剩余煤气 ,兖州焦化厂研制开发了直燃式煤气发电技术 ,将放散煤气送入机组发电 ,既充分利用了能源、保护了环境 ,又创造了良好的经济和社会效益。
4) generating electricity
发电
1.
The flowsheet, project engineering, its operating state and economical benefit of the generating electricity project with waste heat of straight cooler gas in MAGAMG 300m~2 sintering plant were presented in this paper.
本文介绍了马钢300 m~2烧结机带冷余热发电工程的工艺流程,项目建设、生产实践及经济效益等情况。
2.
The characteristics and main treatment methods of municipal domestic waste in China were introduced,the integrated economic benefits of waste incineration and landfill were compared,the main restricted factors and related state policy for waste incineration and generating electricity were analyzed,and optimism foreground for waste incineration and generating electricity in China was pointed out.
介绍了我国城市生活垃圾的特征及其主要处理方法,对垃圾焚烧与填埋的综合效益进行比较,分析制约垃圾焚烧发电的主要因素以及国家对垃圾焚烧发电的相关政策,指出我国城市生活垃圾焚烧发电前景乐观。
3.
The advantages, disadvantages and running performance when utilizing blast furnace gas for generating electricity in the steam turbine aircrew, gas turbine and combined cycle generation, and gas international combustion engine are analyzed.
分析了蒸汽轮机、燃气轮机及其联合循环发电、燃气内燃机这三种高炉煤气发电形式的优缺点及其运行状况。
5) generation
发电
1.
Developing Summarization of Domestic and Intermational Solar Energy PV Generation;
国内外太阳能光伏发电发展综述
2.
The role of new energy generation in power on construction of Qinghai province;
新能源发电在青海省电力建设中的作用
3.
A brief introduce the power generation of waste heat from pre-baked anode processing and the technique of system control.
本文简述了预焙阳极余热发电的工艺流程,及工艺对系统控制的要求,并用DCS系统实现对预焙阳极余热锅炉、软水站、汽轮机、发电机等的重要参数进行检测,对锅炉汽包、主蒸汽、凝结水等实施有效控制,用联锁控制确保系统正常安全运行的方法。
6) electricity generation
发电
1.
Study on commercial thermoelectric cooling modules for electricity generation;
商用温差电致冷组件用于发电的研究
2.
The development of multi-function power source for electricity generation and MMA controlled by single chip microcomputer;
微机控制的发电、MMA一体化多功能电源
3.
It integrates walking,electricity generation,welding and hosting in a body.
针对全位置自动焊技术在管线中的应用,为解决野外管线施工的流动性、环境恶劣、无电力供应问题,研究一种将行走、发电、焊接、吊装等作业于一身的多功能焊接车。
参考词条
补充资料:发电机电压配电装置
发电机电压配电装置
generator voltage switchgear installation
fod一onj一d一onyo Pe一d一on zhuongzh-发电机电压配电装t(generator voltageswitehgear installation)单机容量为50 Mw或以下的火电厂或工业企业自备热电站中.以发电机电压向附近企业或车间供电的配电装置。在中国该容量发电机电压为6.3 kV或10.5 kV。 发电机电压的电气设备主要为屋内型,设备布!可为装配式,也可采用成套开关柜,故发电机电压配电装置为屋内型配电装置。 发电机电压配电装置主要特点为出线回路数多,短路电流大。机组容量在25 MW及以上时,一般采用双母线接线。母线按连接机组台数分段。为限制短路电流,首先装设母线分段电抗器,使出线和用户侧能采用价廉的轻型断路器。如分段电抗器还不足以限制短路电流,则在出线回路装设电抗器。由于出线回路数一般都较多,有时可用一个间隔装一个断路器和一个电抗器带2副出线隔离开关,向两个不同用户供电。双母线出线带电抗器的配电装置一般采用两层布置,如图l所示。图1两层布里发电机电压 配电装1断面图单机容量为12 MW及以下的小型电厂,一般采用单母线或单母线分段接线的成套开关柜(如图2所示).成套开关柜可为固定式或手车式,后者断路器装在手车上,可以抽出检修,而用备用手车代替。手车上有隔离开关触头,代替断路器两侧的隔离开关。 ┌─────────────────┬──┐ ┌─┤秘 │) │ │口│ │术 │ ├─┤ │羹 │ │参├─────┬───┬────┐ │ │ │/ │一铱爷铱~%┼部┐ │惑 │ │ │ │/ │懂 │1 ├─┼────┤ │ │ │/ ││ │} │寻│,11一l │ │ │ │zz││ │ │ ├────┼─┐│ │ │/ ││ │ │ │多一 │月││ │ │要├┴────┴─┴─┴────┴─┴┼──┤ │才│蜀仁黔上 │L恻 │ │ ├─────┬──┐ ├──┴┐┌┴─┤重1000 │ │ │肇 ││庄三│ │ │ │ │└──┤ │ │ │ │ │ │ │ ├───┘ ├─────┤ │ │ │ │ │ │ └─────┴──┴────────┘ 图2单层固定式开关柜发电机 电压配电装置断面图 目前成套开关柜中主要装设真空断路器或SF。断路器,其额定电流为630一4000A。开断短路电流为16~31.5 kA的,可以用在单机容量小的电厂。开断电流为40~50 kA的,可以用在大型热电厂中。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。